[00:00:23]

*** EcrCore started. Build 196 ***
[00:00:23]MH_InterfaceInit /dev/i2c-1
[00:00:23]Malloc ok
[00:00:23]/dev/ttyS4 opened
[00:00:23]MH_GetMetrics
[00:00:23]Write to MH i2c: 00 00 00 01 00 00 
[00:00:23]Write i2c OK
[00:00:23]MH_I2C_Read...
[00:00:23]Read from MH i2c: 00 
[00:00:23]MH_I2C_Read...
[00:00:23]Read from MH i2c: 00 29 00 
[00:00:23]MH_I2C_Read...
[00:00:23]Read from MH i2c: 00 29 00 01 00 00 03 9C 77 C0 01 31 39 30 33 53 51 38 38 54 00 00 00 00 57 25 BE FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 01 03 00 63 
[00:00:23]Are we in boot?
[00:00:23]We are in boot - try to switch
[00:00:23]Write to MH i2c: A0 00 00 02 00 A1 
[00:00:23]Write i2c OK
[00:00:23]MH_I2C_Read...
[00:00:23]Read from MH i2c: A0 
[00:00:23]MH_I2C_Read...
[00:00:23]Read from MH i2c: A0 01 00 
[00:00:23]MH_I2C_Read...
[00:00:23]*** Check firmware version 30620, crc_r 49A1A6DB, crc_c: 49A1A6DB, size: 53248
[00:00:23]*** 
[00:00:23]Read from MH i2c: A0 01 00 02 00 00 A2 
[00:00:23]*** Starting fw at address 01020100 (2007E328 010249C5)
[00:00:23]*** Waiting for read because exit forced
[00:00:23]*** 10 ms more...
[00:00:23]*** MH1903S init start (LINUX_LIGHT)
[00:00:23]*** Compilation Date Jun 20 2023 Time 12:36:20
[00:00:23]*** Serial: 3139303353513838 54000000005725BE (1903SQ88T)
[00:00:23]*** User serial: FFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFF (ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ)
[00:00:23]*** step 0: 5000 (2650, 2350 REF)
[00:00:23]*** step 1: 4835 (2500, 2335 REF)
[00:00:23]*** step 2: 4676 (2440, 2236 REF)
[00:00:23]*** step 3: 4523 (2280, 2243 REF)
[00:00:23]*** step 4: 4376 (2160, 2216 REF)
[00:00:23]*** step 5: 4235 (2050, 2185 REF)
[00:00:23]*** step 6: 4098 (1950, 2148 REF)
[00:00:23]*** step 7: 3967 (1870, 2097 REF)
[00:00:23]*** step 8: 3840 (1828, 2012 REF)
[00:00:23]*** step 9: 3719 (1728, 1991 REF)
[00:00:23]*** step 10: 3601 (1675, 1926 REF)
[00:00:23]*** step 11: 3488 (1635, 1853 REF)
[00:00:23]*** step 12: 3379 (1595, 1784 REF)
[00:00:23]*** step 13: 3275 (1565, 1710 REF)
[00:00:23]*** step 14: 3174 (1543, 1631 REF)
[00:00:23]*** step 15: 3077 (1523, 1554 REF)
[00:00:23]*** step 16: 2983 (1503, 1480 REF)
[00:00:23]*** step 17: 2893 (1486, 1407 REF)
[00:00:23]*** step 18: 2806 (1466, 1340 REF)
[00:00:23]*** step 19: 2723 (1426, 1297 REF)
[00:00:23]*** step 20: 2642 (1406, 1236 REF)
[00:00:23]*** step 21: 2565 (1384, 1181 REF)
[00:00:23]*** step 22: 2490 (1364, 1126 REF)
[00:00:23]*** step 23: 2418 (1344, 1074 REF)
[00:00:23]*** step 24: 2349 (1322, 1027 REF)
[00:00:23]*** step 25: 2283 (1302, 981 REF)
[00:00:23]*** step 26: 2218 (1282, 936 REF)
[00:00:23]*** step 27: 2157 (1262, 895 REF)
[00:00:23]*** step 28: 2097 (1242, 855 REF)
[00:00:23]*** step 29: 2040 (1222, 818 REF)
[00:00:23]*** step 30: 1985 (1202, 783 REF)
[00:00:23]*** step 31: 1932 (1191, 741 REF)
[00:00:23]*** step 32: 1880 (1181, 699 REF)
[00:00:23]*** step 33: 1831 (1171, 660 REF)
[00:00:23]*** step 34: 1784 (1161, 623 REF)
[00:00:23]*** step 35: 1738 (1151, 587 REF)
[00:00:23]*** step 36: 1694 (1141, 553 REF)
[00:00:23]*** step 37: 1652 (1131, 521 REF)
[00:00:23]*** step 38: 1611 (1121, 490 REF)
[00:00:23]*** step 39: 1572 (1111, 461 REF)
[00:00:23]*** step 40: 1534 (1103, 431 REF)
[00:00:23]*** step 41: 1497 (1093, 404 REF)
[00:00:23]*** step 42: 1462 (1083, 379 REF)
[00:00:23]*** step 43: 1428 (1073, 355 REF)
[00:00:23]*** step 44: 1396 (1063, 333 REF)
[00:00:23]*** step 45: 1365 (1053, 312 REF)
[00:00:23]*** step 46: 1334 (1043, 291 REF)
[00:00:23]*** step 47: 1305 (1033, 272 REF)
[00:00:23]*** step 48: 1277 (1023, 254 REF)
[00:00:23]*** step 49: 1250 (1013, 237 REF)
[00:00:23]*** step 50: 1224 (990, 234 REF)
[00:00:23]*** step 51: 1199 (980, 219 REF)
[00:00:23]*** step 52: 1175 (970, 205 REF)
[00:00:23]*** step 53: 1152 (960, 192 REF)
[00:00:23]*** step 54: 1130 (950, 180 REF)
[00:00:23]*** step 55: 1108 (940, 168 REF)
[00:00:23]*** step 56: 1088 (930, 158 REF)
[00:00:23]*** step 57: 1068 (920, 148 REF)
[00:00:23]*** step 58: 1049 (910, 139 REF)
[00:00:23]*** step 59: 1030 (900, 130 REF)
[00:00:23]*** step 60: 1012 (890, 122 REF)
[00:00:23]*** step 61: 995 (880, 115 REF)
[00:00:23]*** step 62: 979 (870, 109 REF)
[00:00:23]*** step 63: 963 (860, 103 REF)
[00:00:23]*** step 64: 948 (850, 98 REF)
[00:00:23]*** step 65: 933 (840, 93 REF)
[00:00:23]*** step 66: 919 (830, 89 REF)
[00:00:23]*** step 67: 905 (820, 85 REF)
[00:00:23]*** step 68: 892 (810, 82 REF)
[00:00:23]*** step 69: 879 (800, 79 REF)
[00:00:23]*** step 70: 867 (790, 77 REF)
[00:00:23]*** step 71: 855 (780, 75 REF)
[00:00:23]*** step 72: 844 (770, 74 REF)
[00:00:23]*** step 73: 833 (760, 73 REF)
[00:00:23]*** step 74: 822 (750, 72 REF)
[00:00:23]*** step 75: 812 (740, 72 REF)
[00:00:23]*** step 76: 803 (730, 73 REF)
[00:00:23]*** step 77: 793 (720, 73 REF)
[00:00:23]*** step 78: 784 (710, 74 REF)
[00:00:23]*** step 79: 776 (700, 76 REF)
[00:00:23]*** step 80: 767 (690, 77 REF)
[00:00:23]*** step 81: 759 (680, 79 REF)
[00:00:23]*** step 82: 751 (670, 81 REF)
[00:00:23]*** step 83: 744 (660, 84 REF)
[00:00:23]*** step 84: 737 (650, 87 REF)
[00:00:23]*** step 85: 730 (640, 90 REF)
[00:00:23]*** step 86: 723 (630, 93 REF)
[00:00:23]*** step 87: 717 (620, 97 REF)
[00:00:23]*** step 88: 710 (610, 100 REF)
[00:00:23]*** step 89: 705 (600, 105 REF)
[00:00:23]*** step 90: 699
[00:00:23]*** step 91: 693
[00:00:23]*** step 92: 688
[00:00:23]*** step 93: 683
[00:00:23]*** step 94: 678
[00:00:23]*** step 95: 673
[00:00:23]*** step 96: 669
[00:00:23]*** step 97: 664
[00:00:23]*** step 98: 660
[00:00:23]*** step 99: 656
[00:00:23]*** step 100: 652
[00:00:23]*** step 101: 648
[00:00:23]*** step 102: 644
[00:00:23]*** step 103: 641
[00:00:23]*** step 104: 638
[00:00:23]*** step 105: 634
[00:00:23]*** step 106: 631
[00:00:23]*** step 107: 628
[00:00:23]*** step 108: 625
[00:00:23]*** step 109: 622
[00:00:23]*** step 110: 620
[00:00:23]*** step 111: 617
[00:00:23]*** step 112: 615
[00:00:23]*** step 113: 612
[00:00:23]*** step 114: 610
[00:00:23]*** step 115: 608
[00:00:23]*** step 116: 605
[00:00:23]*** step 117: 603
[00:00:23]*** step 118: 601
[00:00:23]*** step 119: 599
[00:00:23]*** printer: Printer HW initialized
[00:00:23]*** initSamCard finished
[00:00:23]*** RTC: 12441+1716808777=1716821218
[00:00:23]*** BPK Status Register BPK_RDY = 0x0
[00:00:23]*** SEN State Register SEN_STATE = 0x220ff
[00:00:23]*** 32K Frequency Sensor Enable SEN_XTAL32_EN = 0x80000055
[00:00:23]*** Analog Control Register 0 SEN_ANA0 = 0x33560624
[00:00:23]*** Is cutter blocked?
[00:00:24]MH_GetMetrics
[00:00:24]Write to MH i2c: 00 00 00 03 00 02 
[00:00:24]Write i2c OK
[00:00:24]MH_I2C_Read...
[00:00:24]Read from MH i2c: 00 
[00:00:24]MH_I2C_Read...
[00:00:24]Read from MH i2c: 00 29 00 
[00:00:24]MH_I2C_Read...
[00:00:24]Read from MH i2c: 00 29 00 03 00 00 03 9C 77 C0 01 31 39 30 33 53 51 38 38 54 00 00 00 00 57 25 BE FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 00 03 00 64 
[00:00:24]Are we in boot?
[00:00:24]We are not in boot now
[00:00:24]Write to MH i2c: 01 00 00 04 00 04 
[00:00:24]Write i2c OK
[00:00:24]MH_I2C_Read...
[00:00:24]Read from MH i2c: 01 
[00:00:24]MH_I2C_Read...
[00:00:24]Read from MH i2c: 01 07 00 
[00:00:24]MH_I2C_Read...
[00:00:24]Read from MH i2c: 01 07 00 04 00 00 00 00 00 00 FF 0F 19 
[00:00:24]Model is 3
[00:00:24]MH firmware is 30620
[00:00:24]MH boot firmware is 3
[00:00:24]MH_SetPrinterDots 448
[00:00:24]HeadWidthInBytes 56
[00:00:24]maxmasksize 7
[00:00:24]Write to MH i2c: D6 06 00 05 00 41 00 60 00 FF FF 7F 
[00:00:24]Write i2c OK
[00:00:24]MH_I2C_Read...
[00:00:24]Read from MH i2c: D6 
[00:00:24]MH_I2C_Read...
[00:00:24]Read from MH i2c: D6 01 00 
[00:00:24]MH_I2C_Read...
[00:00:24]Read from MH i2c: D6 01 00 05 00 00 DB 
[00:00:24]Write to MH i2c: D5 00 00 06 00 DA 
[00:00:24]Write i2c OK
[00:00:24]MH_I2C_Read...
[00:00:24]Read from MH i2c: D5 
[00:00:24]MH_I2C_Read...
[00:00:24]Read from MH i2c: D5 01 00 
[00:00:24]MH_I2C_Read...
[00:00:24]Read from MH i2c: D5 01 00 06 00 00 DB 
[00:00:24]Load OK
[00:00:24]LoadDictionaryFromArray
[00:00:24]Load OK
[00:00:24]LoadDictionaryFromArray
[00:00:24]Load OK
[00:00:24]LoadDictionaryFromArray
[00:00:24]Load OK
[00:00:24]LoadDictionaryFromArray
[00:00:24]Load OK
[00:00:24]LoadDictionaryFromArray
[00:00:24]Load OK
[00:00:24]LoadDictionaryFromArray
[00:00:24]Load OK
[00:00:24]LoadDictionaryFromArray
[00:00:24]Load OK
[00:00:24]LoadDictionaryFromArray
[00:00:24]Load OK
[00:00:24]LoadDictionaryFromArray
[00:00:24]Load OK
[00:00:24]LoadDictionaryFromArray
[00:00:24]Load OK
[00:00:24]LoadDictionaryFromArray
[00:00:24]Load OK
[00:00:24]LoadDictionaryFromArray
[00:00:24]Load OK
[00:00:24]ExternCall_SetCallbacks
[00:00:24]NVStorageInit
[00:00:24]No nvstorage dir found. Trying to create it.
[00:00:24]Nvstorage dir /storage created.
[00:00:24]MH_GetDate
[00:00:24]Write to MH i2c: F0 00 00 07 00 F6 
[00:00:24]Write i2c OK
[00:00:24]MH_I2C_Read...
[00:00:24]Read from MH i2c: F0 
[00:00:24]MH_I2C_Read...
[00:00:24]Read from MH i2c: F0 09 00 
[00:00:24]MH_I2C_Read...
[00:00:24]Read from MH i2c: F0 09 00 07 00 00 E3 9C 54 66 49 6C 54 66 A7 
[14:46:59]Current date/time: 27.05.2024 14:46
[14:46:59]FM_Init
[14:46:59]wFMConnect
[14:46:59]MH_SAM_On
[14:46:59]Write to MH i2c: E0 00 00 08 00 E7 
[14:46:59]Write i2c OK
[14:46:59]MH_I2C_Read...
[14:46:59]*** iso7816_init failed -2820!
[14:46:59]Read from MH i2c: E0 
[14:46:59]MH_I2C_Read...
[14:46:59]Read from MH i2c: E0 05 00 
[14:46:59]MH_I2C_Read...
[14:46:59]Read from MH i2c: E0 05 00 08 00 10 FC F4 FF FF EA 
[14:46:59]Error from MH - 10
[14:46:59]No FM detected - please insert FM
[14:46:59]DocumentArchiveInit
[14:46:59]Start Httpd...
[14:46:59]Httpd thread 3067571556 created
[14:46:59]Write to MH i2c: 01 00 00 09 00 09 
[14:46:59]Write i2c OK
[14:46:59]MH_I2C_Read...
[14:46:59]Read from MH i2c: 01 
[14:46:59]MH_I2C_Read...
[14:46:59]Read from MH i2c: 01 07 00 
[14:46:59]MH_I2C_Read...
[14:46:59]Read from MH i2c: 01 07 00 09 00 00 00 00 00 00 FF 0F 1E 
[14:46:59]No OFD sender enable setting
[14:46:59]MH Int Process started
[14:46:59]Allocated Socket 7
[14:46:59]Bind OK
[14:46:59]Listen OK
[14:46:59]httpd running on port 8080
[14:46:59]Waiting for new connection...
[14:47:04]No OFD sender enable setting
[14:47:09]No OFD sender enable setting
[14:47:14]No OFD sender enable setting
[00:00:11]

*** EcrCore started. Build 196 ***
[00:00:11]/dev/ttyS4 opened
[00:00:11]MH_InterfaceInit /dev/i2c-1
[00:00:11]Malloc ok
[00:00:11]MH_GetMetrics
[00:00:11]Write to MH i2c: 00 00 00 01 00 00 
[00:00:11]Write i2c OK
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: 00 
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: 00 29 00 
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: 00 29 00 01 00 00 03 9C 77 C0 01 31 39 30 33 53 51 38 38 54 00 00 00 00 57 25 BE FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 01 03 00 63 
[00:00:11]Are we in boot?
[00:00:11]We are in boot - try to switch
[00:00:11]Write to MH i2c: A0 00 00 02 00 A1 
[00:00:11]Write i2c OK
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: A0 
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: A0 01 00 
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: *** Check firmware version 30620, crc_r 49A1A6DB, crc_c: 49A1A6DB, size: 53248
[00:00:11]A0 *** 
[00:00:11]01 00 02 00 00 A2 
[00:00:11]*** Starting fw at address 01020100 (2007E328 010249C5)
[00:00:11]*** Waiting for read because exit forced
[00:00:11]*** 10 ms more...
[00:00:11]*** MH1903S init start (LINUX_LIGHT)
[00:00:11]*** Compilation Date Jun 20 2023 Time 12:36:20
[00:00:11]*** Serial: 3139303353513838 54000000005725BE (1903SQ88T)
[00:00:11]*** User serial: FFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFF (ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ)
[00:00:11]*** step 0: 5000 (2650, 2350 REF)
[00:00:11]*** step 1: 4835 (2500, 2335 REF)
[00:00:11]*** step 2: 4676 (2440, 2236 REF)
[00:00:11]*** step 3: 4523 (2280, 2243 REF)
[00:00:11]*** step 4: 4376 (2160, 2216 REF)
[00:00:11]*** step 5: 4235 (2050, 2185 REF)
[00:00:11]*** step 6: 4098 (1950, 2148 REF)
[00:00:11]*** step 7: 3967 (1870, 2097 REF)
[00:00:11]*** step 8: 3840 (1828, 2012 REF)
[00:00:11]*** step 9: 3719 (1728, 1991 REF)
[00:00:11]*** step 10: 3601 (1675, 1926 REF)
[00:00:11]*** step 11: 3488 (1635, 1853 REF)
[00:00:11]*** step 12: 3379 (1595, 1784 REF)
[00:00:11]*** step 13: 3275 (1565, 1710 REF)
[00:00:11]*** step 14: 3174 (1543, 1631 REF)
[00:00:11]*** step 15: 3077 (1523, 1554 REF)
[00:00:11]*** step 16: 2983 (1503, 1480 REF)
[00:00:11]*** step 17: 2893 (1486, 1407 REF)
[00:00:11]*** step 18: 2806 (1466, 1340 REF)
[00:00:11]*** step 19: 2723 (1426, 1297 REF)
[00:00:11]*** step 20: 2642 (1406, 1236 REF)
[00:00:11]*** step 21: 2565 (1384, 1181 REF)
[00:00:11]*** step 22: 2490 (1364, 1126 REF)
[00:00:11]*** step 23: 2418 (1344, 1074 REF)
[00:00:11]*** step 24: 2349 (1322, 1027 REF)
[00:00:11]*** step 25: 2283 (1302, 981 REF)
[00:00:11]*** step 26: 2218 (1282, 936 REF)
[00:00:11]*** step 27: 2157 (1262, 895 REF)
[00:00:11]*** step 28: 2097 (1242, 855 REF)
[00:00:11]*** step 29: 2040 (1222, 818 REF)
[00:00:11]*** step 30: 1985 (1202, 783 REF)
[00:00:11]*** step 31: 1932 (1191, 741 REF)
[00:00:11]*** step 32: 1880 (1181, 699 REF)
[00:00:11]*** step 33: 1831 (1171, 660 REF)
[00:00:11]*** step 34: 1784 (1161, 623 REF)
[00:00:11]*** step 35: 1738 (1151, 587 REF)
[00:00:11]*** step 36: 1694 (1141, 553 REF)
[00:00:11]*** step 37: 1652 (1131, 521 REF)
[00:00:11]*** step 38: 1611 (1121, 490 REF)
[00:00:11]*** step 39: 1572 (1111, 461 REF)
[00:00:11]*** step 40: 1534 (1103, 431 REF)
[00:00:11]*** step 41: 1497 (1093, 404 REF)
[00:00:11]*** step 42: 1462 (1083, 379 REF)
[00:00:11]*** step 43: 1428 (1073, 355 REF)
[00:00:11]*** step 44: 1396 (1063, 333 REF)
[00:00:11]*** step 45: 1365 (1053, 312 REF)
[00:00:11]*** step 46: 1334 (1043, 291 REF)
[00:00:11]*** step 47: 1305 (1033, 272 REF)
[00:00:11]*** step 48: 1277 (1023, 254 REF)
[00:00:11]*** step 49: 1250 (1013, 237 REF)
[00:00:11]*** step 50: 1224 (990, 234 REF)
[00:00:11]*** step 51: 1199 (980, 219 REF)
[00:00:11]*** step 52: 1175 (970, 205 REF)
[00:00:11]*** step 53: 1152 (960, 192 REF)
[00:00:11]*** step 54: 1130 (950, 180 REF)
[00:00:11]*** step 55: 1108 (940, 168 REF)
[00:00:11]*** step 56: 1088 (930, 158 REF)
[00:00:11]*** step 57: 1068 (920, 148 REF)
[00:00:11]*** step 58: 1049 (910, 139 REF)
[00:00:11]*** step 59: 1030 (900, 130 REF)
[00:00:11]*** step 60: 1012 (890, 122 REF)
[00:00:11]*** step 61: 995 (880, 115 REF)
[00:00:11]*** step 62: 979 (870, 109 REF)
[00:00:11]*** step 63: 963 (860, 103 REF)
[00:00:11]*** step 64: 948 (850, 98 REF)
[00:00:11]*** step 65: 933 (840, 93 REF)
[00:00:11]*** step 66: 919 (830, 89 REF)
[00:00:11]*** step 67: 905 (820, 85 REF)
[00:00:11]*** step 68: 892 (810, 82 REF)
[00:00:11]*** step 69: 879 (800, 79 REF)
[00:00:11]*** step 70: 867 (790, 77 REF)
[00:00:11]*** step 71: 855 (780, 75 REF)
[00:00:11]*** step 72: 844 (770, 74 REF)
[00:00:11]*** step 73: 833 (760, 73 REF)
[00:00:11]*** step 74: 822 (750, 72 REF)
[00:00:11]*** step 75: 812 (740, 72 REF)
[00:00:11]*** step 76: 803 (730, 73 REF)
[00:00:11]*** step 77: 793 (720, 73 REF)
[00:00:11]*** step 78: 784 (710, 74 REF)
[00:00:11]*** step 79: 776 (700, 76 REF)
[00:00:11]*** step 80: 767 (690, 77 REF)
[00:00:11]*** step 81: 759 (680, 79 REF)
[00:00:11]*** step 82: 751 (670, 81 REF)
[00:00:11]*** step 83: 744 (660, 84 REF)
[00:00:11]*** step 84: 737 (650, 87 REF)
[00:00:11]*** step 85: 730 (640, 90 REF)
[00:00:11]*** step 86: 723 (630, 93 REF)
[00:00:11]*** step 87: 717 (620, 97 REF)
[00:00:11]*** step 88: 710 (610, 100 REF)
[00:00:11]*** step 89: 705 (600, 105 REF)
[00:00:11]*** step 90: 699
[00:00:11]*** step 91: 693
[00:00:11]*** step 92: 688
[00:00:11]*** step 93: 683
[00:00:11]*** step 94: 678
[00:00:11]*** step 95: 673
[00:00:11]*** step 96: 669
[00:00:11]*** step 97: 664
[00:00:11]*** step 98: 660
[00:00:11]*** step 99: 656
[00:00:11]*** step 100: 652
[00:00:11]*** step 101: 648
[00:00:11]*** step 102: 644
[00:00:11]*** step 103: 641
[00:00:11]*** step 104: 638
[00:00:11]*** step 105: 634
[00:00:11]*** step 106: 631
[00:00:11]*** step 107: 628
[00:00:11]*** step 108: 625
[00:00:11]*** step 109: 622
[00:00:11]*** step 110: 620
[00:00:11]*** step 111: 617
[00:00:11]*** step 112: 615
[00:00:11]*** step 113: 612
[00:00:11]*** step 114: 610
[00:00:11]*** step 115: 608
[00:00:11]*** step 116: 605
[00:00:11]*** step 117: 603
[00:00:11]*** step 118: 601
[00:00:11]*** step 119: 599
[00:00:11]*** printer: Printer HW initialized
[00:00:11]*** initSamCard finished
[00:00:11]*** RTC: 12531+1716808777=1716821308
[00:00:11]*** BPK Status Register BPK_RDY = 0x0
[00:00:11]*** SEN State Register SEN_STATE = 0x220ff
[00:00:11]*** 32K Frequency Sensor Enable SEN_XTAL32_EN = 0x80000055
[00:00:11]*** Analog Control Register 0 SEN_ANA0 = 0x33560624
[00:00:11]*** Is cutter blocked?
[00:00:12]MH_GetMetrics
[00:00:12]Write to MH i2c: 00 00 00 03 00 02 
[00:00:12]Write i2c OK
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 00 29 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 00 29 00 03 00 00 03 9C 77 C0 01 31 39 30 33 53 51 38 38 54 00 00 00 00 57 25 BE FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 00 03 00 64 
[00:00:12]Are we in boot?
[00:00:12]We are not in boot now
[00:00:12]Write to MH i2c: 01 00 00 04 00 04 
[00:00:12]Write i2c OK
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 01 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 01 07 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 01 07 00 04 00 00 00 00 00 00 FF 0F 19 
[00:00:12]Model is 3
[00:00:12]MH firmware is 30620
[00:00:12]MH boot firmware is 3
[00:00:12]MH_SetPrinterDots 448
[00:00:12]HeadWidthInBytes 56
[00:00:12]maxmasksize 7
[00:00:12]Write to MH i2c: D6 06 00 05 00 41 00 60 00 FF FF 7F 
[00:00:12]Write i2c OK
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D6 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D6 01 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D6 01 00 05 00 00 DB 
[00:00:12]Write to MH i2c: D5 00 00 06 00 DA 
[00:00:12]Write i2c OK
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D5 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D5 01 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D5 01 00 06 00 00 DB 
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]ExternCall_SetCallbacks
[00:00:12]NVStorageInit
[00:00:12]MH_GetDate
[00:00:12]Write to MH i2c: F0 00 00 07 00 F6 
[00:00:12]Write i2c OK
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: F0 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: F0 09 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: F0 09 00 07 00 00 3D 9D 54 66 49 6C 54 66 02 
[14:48:29]Current date/time: 27.05.2024 14:48
[14:48:29]FM_Init
[14:48:29]wFMConnect
[14:48:29]MH_SAM_On
[14:48:29]Write to MH i2c: E0 00 00 08 00 E7 
[14:48:29]Write i2c OK
[14:48:29]MH_I2C_Read...
[14:48:29]*** iso7816_init failed -2820!
[14:48:29]Read from MH i2c: E0 
[14:48:29]MH_I2C_Read...
[14:48:29]Read from MH i2c: E0 05 00 
[14:48:29]MH_I2C_Read...
[14:48:29]Read from MH i2c: E0 05 00 08 00 10 FC F4 FF FF EA 
[14:48:29]Error from MH - 10
[14:48:29]No FM detected - please insert FM
[14:48:29]DocumentArchiveInit
[14:48:29]Start Httpd...
[14:48:29]Httpd thread 3067469156 created
[14:48:29]Write to MH i2c: 01 00 00 09 00 09 
[14:48:29]Write i2c OK
[14:48:29]MH_I2C_Read...
[14:48:29]Read from MH i2c: 01 
[14:48:29]MH_I2C_Read...
[14:48:29]Read from MH i2c: 01 07 00 
[14:48:29]MH_I2C_Read...
[14:48:29]Read from MH i2c: 01 07 00 09 00 00 00 00 00 00 FF 0F 1E 
[14:48:29]No OFD sender enable setting
[14:48:29]MH Int Process started
[14:48:29]Allocated Socket 7
[14:48:29]Bind OK
[14:48:29]Listen OK
[14:48:29]httpd running on port 8080
[14:48:29]Waiting for new connection...
[14:48:34]No OFD sender enable setting
[14:48:35]Request to exit ecrcore...
[14:48:35]Httpd server socket closed
[14:48:35]accept exits with -1
[14:48:35]accept error
[14:48:35]Httpd stopped
[14:48:35]ODFSender stopped
[14:48:35]All buffers freed
[14:48:35]MH_Interface closed
[14:48:35]Waiting for MH logger exits...
[14:48:38]MH Log thread stopped
[14:48:38]Waiting for logger exits...
[14:48:39]

*** EcrCore started. Build 196 ***
[14:48:39]MH_InterfaceInit /dev/i2c-1
[14:48:39]Malloc ok
[14:48:39]MH_GetMetrics
[14:48:39]Write to MH i2c: 00 00 00 01 00 00 
[14:48:39]Write i2c OK
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: 00 
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: 00 29 00 
[14:48:39]MH_I2C_Read...
[14:48:39]/dev/ttyS4 opened
[14:48:39]Read from MH i2c: 00 29 00 01 00 00 03 9C 77 C0 01 31 39 30 33 53 51 38 38 54 00 00 00 00 57 25 BE FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 00 03 00 62 
[14:48:39]Are we in boot?
[14:48:39]We are not in boot now
[14:48:39]Write to MH i2c: 01 00 00 02 00 02 
[14:48:39]Write i2c OK
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: 01 
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: 01 07 00 
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: 01 07 00 02 00 00 00 00 00 00 FF 0F 17 
[14:48:39]Model is 3
[14:48:39]MH firmware is 30620
[14:48:39]MH boot firmware is 3
[14:48:39]MH_SetPrinterDots 448
[14:48:39]HeadWidthInBytes 56
[14:48:39]maxmasksize 7
[14:48:39]Write to MH i2c: D6 06 00 03 00 41 00 60 00 FF FF 7D 
[14:48:39]Write i2c OK
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: D6 
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: D6 01 00 
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: D6 01 00 03 00 00 D9 
[14:48:39]Write to MH i2c: D5 00 00 04 00 D8 
[14:48:39]Write i2c OK
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: D5 
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: D5 01 00 
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: D5 01 00 04 00 00 D9 
[14:48:39]Load OK
[14:48:39]LoadDictionaryFromArray
[14:48:39]Load OK
[14:48:39]LoadDictionaryFromArray
[14:48:39]Load OK
[14:48:39]LoadDictionaryFromArray
[14:48:39]Load OK
[14:48:39]LoadDictionaryFromArray
[14:48:39]Load OK
[14:48:39]LoadDictionaryFromArray
[14:48:39]Load OK
[14:48:39]LoadDictionaryFromArray
[14:48:39]Load OK
[14:48:39]LoadDictionaryFromArray
[14:48:39]Load OK
[14:48:39]LoadDictionaryFromArray
[14:48:39]Load OK
[14:48:39]LoadDictionaryFromArray
[14:48:39]Load OK
[14:48:39]LoadDictionaryFromArray
[14:48:39]Load OK
[14:48:39]LoadDictionaryFromArray
[14:48:39]Load OK
[14:48:39]LoadDictionaryFromArray
[14:48:39]Load OK
[14:48:39]ExternCall_SetCallbacks
[14:48:39]NVStorageInit
[14:48:39]MH_GetDate
[14:48:39]Write to MH i2c: F0 00 00 05 00 F4 
[14:48:39]Write i2c OK
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: F0 
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: F0 09 00 
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: F0 09 00 05 00 00 47 9D 54 66 49 6C 54 66 0A 
[14:48:39]Current date/time: 27.05.2024 14:48
[14:48:39]FM_Init
[14:48:39]wFMConnect
[14:48:39]MH_SAM_On
[14:48:39]Write to MH i2c: E0 00 00 06 00 E5 
[14:48:39]Write i2c OK
[14:48:39]MH_I2C_Read...
[14:48:39]*** iso7816_init failed -2820!
[14:48:39]Read from MH i2c: E0 
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: E0 05 00 
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: E0 05 00 06 00 10 FC F4 FF FF E8 
[14:48:39]Error from MH - 10
[14:48:39]No FM detected - please insert FM
[14:48:39]DocumentArchiveInit
[14:48:39]Start Httpd...
[14:48:39]Httpd thread 3067669860 created
[14:48:39]Write to MH i2c: 01 00 00 07 00 07 
[14:48:39]No OFD sender enable setting
[14:48:39]Allocated Socket 5
[14:48:39]Bind OK
[14:48:39]Listen OK
[14:48:39]httpd running on port 8080
[14:48:39]Waiting for new connection...
[14:48:39]Write i2c OK
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: 01 
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: 01 07 00 
[14:48:39]MH_I2C_Read...
[14:48:39]Read from MH i2c: 01 07 00 07 00 00 00 00 00 00 FF 0F 1C 
[14:48:39]MH Int Process started
[14:48:44]No OFD sender enable setting
[14:48:46]*** Cut start
[14:48:46]*** Partial cut
[14:48:46]*** CUTSNS_PIN = 1
[14:48:46]*** CUTSNS_PIN = 0
[14:48:46]*** Brake cut motor
[14:48:47]*** Stop cut motor
[14:48:47]*** Cut end
[14:48:47]*** Cut start
[14:48:47]*** Partial cut
[14:48:47]*** CUTSNS_PIN = 1
[14:48:47]*** CUTSNS_PIN = 0
[14:48:47]*** Brake cut motor
[14:48:47]*** Stop cut motor
[14:48:47]*** Cut end
[14:48:49]No OFD sender enable setting
[14:48:54]No OFD sender enable setting
[14:48:59]No OFD sender enable setting
[14:49:04]No OFD sender enable setting
[00:00:11]

*** EcrCore started. Build 196 ***
[00:00:11]/dev/ttyS4 opened
[00:00:11]MH_InterfaceInit /dev/i2c-1
[00:00:11]Malloc ok
[00:00:11]MH_GetMetrics
[00:00:11]Write to MH i2c: 00 00 00 01 00 00 
[00:00:11]Write i2c OK
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: 00 
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: 00 29 00 
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: 00 29 00 01 00 00 03 9C 77 C0 01 31 39 30 33 53 51 38 38 54 00 00 00 00 57 25 BE FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 01 03 00 63 
[00:00:11]Are we in boot?
[00:00:11]We are in boot - try to switch
[00:00:11]Write to MH i2c: A0 00 00 02 00 A1 
[00:00:11]Write i2c OK
[00:00:11]MH_I2C_Read...
[00:00:11]*** Check firmware version 30620, crc_r 49A1A6DB, crc_c: 49A1A6DB, size: 53248
[00:00:11]*** 
[00:00:11]Read from MH i2c: A0 
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: A0 01 00 
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: A0 01 00 02 00 00 A2 
[00:00:11]*** Starting fw at address 01020100 (2007E328 010249C5)
[00:00:11]*** Waiting for read because exit forced
[00:00:11]*** 10 ms more...
[00:00:11]*** MH1903S init start (LINUX_LIGHT)
[00:00:11]*** Compilation Date Jun 20 2023 Time 12:36:20
[00:00:11]*** Serial: 3139303353513838 54000000005725BE (1903SQ88T)
[00:00:11]*** User serial: FFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFF (ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ)
[00:00:11]*** step 0: 5000 (2650, 2350 REF)
[00:00:11]*** step 1: 4835 (2500, 2335 REF)
[00:00:11]*** step 2: 4676 (2440, 2236 REF)
[00:00:11]*** step 3: 4523 (2280, 2243 REF)
[00:00:11]*** step 4: 4376 (2160, 2216 REF)
[00:00:11]*** step 5: 4235 (2050, 2185 REF)
[00:00:11]*** step 6: 4098 (1950, 2148 REF)
[00:00:11]*** step 7: 3967 (1870, 2097 REF)
[00:00:11]*** step 8: 3840 (1828, 2012 REF)
[00:00:11]*** step 9: 3719 (1728, 1991 REF)
[00:00:11]*** step 10: 3601 (1675, 1926 REF)
[00:00:11]*** step 11: 3488 (1635, 1853 REF)
[00:00:11]*** step 12: 3379 (1595, 1784 REF)
[00:00:11]*** step 13: 3275 (1565, 1710 REF)
[00:00:11]*** step 14: 3174 (1543, 1631 REF)
[00:00:11]*** step 15: 3077 (1523, 1554 REF)
[00:00:11]*** step 16: 2983 (1503, 1480 REF)
[00:00:11]*** step 17: 2893 (1486, 1407 REF)
[00:00:11]*** step 18: 2806 (1466, 1340 REF)
[00:00:11]*** step 19: 2723 (1426, 1297 REF)
[00:00:11]*** step 20: 2642 (1406, 1236 REF)
[00:00:11]*** step 21: 2565 (1384, 1181 REF)
[00:00:11]*** step 22: 2490 (1364, 1126 REF)
[00:00:11]*** step 23: 2418 (1344, 1074 REF)
[00:00:11]*** step 24: 2349 (1322, 1027 REF)
[00:00:11]*** step 25: 2283 (1302, 981 REF)
[00:00:11]*** step 26: 2218 (1282, 936 REF)
[00:00:11]*** step 27: 2157 (1262, 895 REF)
[00:00:11]*** step 28: 2097 (1242, 855 REF)
[00:00:11]*** step 29: 2040 (1222, 818 REF)
[00:00:11]*** step 30: 1985 (1202, 783 REF)
[00:00:11]*** step 31: 1932 (1191, 741 REF)
[00:00:11]*** step 32: 1880 (1181, 699 REF)
[00:00:11]*** step 33: 1831 (1171, 660 REF)
[00:00:11]*** step 34: 1784 (1161, 623 REF)
[00:00:11]*** step 35: 1738 (1151, 587 REF)
[00:00:11]*** step 36: 1694 (1141, 553 REF)
[00:00:11]*** step 37: 1652 (1131, 521 REF)
[00:00:11]*** step 38: 1611 (1121, 490 REF)
[00:00:11]*** step 39: 1572 (1111, 461 REF)
[00:00:11]*** step 40: 1534 (1103, 431 REF)
[00:00:11]*** step 41: 1497 (1093, 404 REF)
[00:00:11]*** step 42: 1462 (1083, 379 REF)
[00:00:11]*** step 43: 1428 (1073, 355 REF)
[00:00:11]*** step 44: 1396 (1063, 333 REF)
[00:00:11]*** step 45: 1365 (1053, 312 REF)
[00:00:11]*** step 46: 1334 (1043, 291 REF)
[00:00:11]*** step 47: 1305 (1033, 272 REF)
[00:00:11]*** step 48: 1277 (1023, 254 REF)
[00:00:11]*** step 49: 1250 (1013, 237 REF)
[00:00:11]*** step 50: 1224 (990, 234 REF)
[00:00:11]*** step 51: 1199 (980, 219 REF)
[00:00:11]*** step 52: 1175 (970, 205 REF)
[00:00:11]*** step 53: 1152 (960, 192 REF)
[00:00:11]*** step 54: 1130 (950, 180 REF)
[00:00:11]*** step 55: 1108 (940, 168 REF)
[00:00:11]*** step 56: 1088 (930, 158 REF)
[00:00:11]*** step 57: 1068 (920, 148 REF)
[00:00:11]*** step 58: 1049 (910, 139 REF)
[00:00:11]*** step 59: 1030 (900, 130 REF)
[00:00:11]*** step 60: 1012 (890, 122 REF)
[00:00:11]*** step 61: 995 (880, 115 REF)
[00:00:11]*** step 62: 979 (870, 109 REF)
[00:00:11]*** step 63: 963 (860, 103 REF)
[00:00:11]*** step 64: 948 (850, 98 REF)
[00:00:11]*** step 65: 933 (840, 93 REF)
[00:00:11]*** step 66: 919 (830, 89 REF)
[00:00:11]*** step 67: 905 (820, 85 REF)
[00:00:11]*** step 68: 892 (810, 82 REF)
[00:00:11]*** step 69: 879 (800, 79 REF)
[00:00:11]*** step 70: 867 (790, 77 REF)
[00:00:11]*** step 71: 855 (780, 75 REF)
[00:00:11]*** step 72: 844 (770, 74 REF)
[00:00:11]*** step 73: 833 (760, 73 REF)
[00:00:11]*** step 74: 822 (750, 72 REF)
[00:00:11]*** step 75: 812 (740, 72 REF)
[00:00:11]*** step 76: 803 (730, 73 REF)
[00:00:11]*** step 77: 793 (720, 73 REF)
[00:00:11]*** step 78: 784 (710, 74 REF)
[00:00:11]*** step 79: 776 (700, 76 REF)
[00:00:11]*** step 80: 767 (690, 77 REF)
[00:00:11]*** step 81: 759 (680, 79 REF)
[00:00:11]*** step 82: 751 (670, 81 REF)
[00:00:11]*** step 83: 744 (660, 84 REF)
[00:00:11]*** step 84: 737 (650, 87 REF)
[00:00:11]*** step 85: 730 (640, 90 REF)
[00:00:11]*** step 86: 723 (630, 93 REF)
[00:00:11]*** step 87: 717 (620, 97 REF)
[00:00:11]*** step 88: 710 (610, 100 REF)
[00:00:11]*** step 89: 705 (600, 105 REF)
[00:00:11]*** step 90: 699
[00:00:11]*** step 91: 693
[00:00:11]*** step 92: 688
[00:00:11]*** step 93: 683
[00:00:11]*** step 94: 678
[00:00:11]*** step 95: 673
[00:00:11]*** step 96: 669
[00:00:11]*** step 97: 664
[00:00:11]*** step 98: 660
[00:00:11]*** step 99: 656
[00:00:11]*** step 100: 652
[00:00:11]*** step 101: 648
[00:00:11]*** step 102: 644
[00:00:11]*** step 103: 641
[00:00:11]*** step 104: 638
[00:00:11]*** step 105: 634
[00:00:11]*** step 106: 631
[00:00:11]*** step 107: 628
[00:00:11]*** step 108: 625
[00:00:11]*** step 109: 622
[00:00:11]*** step 110: 620
[00:00:11]*** step 111: 617
[00:00:11]*** step 112: 615
[00:00:11]*** step 113: 612
[00:00:11]*** step 114: 610
[00:00:11]*** step 115: 608
[00:00:11]*** step 116: 605
[00:00:11]*** step 117: 603
[00:00:11]*** step 118: 601
[00:00:11]*** step 119: 599
[00:00:11]*** printer: Printer HW initialized
[00:00:11]*** initSamCard finished
[00:00:11]*** RTC: 13119+1716808777=1716821896
[00:00:11]*** BPK Status Register BPK_RDY = 0x0
[00:00:11]*** SEN State Register SEN_STATE = 0x220ff
[00:00:11]*** 32K Frequency Sensor Enable SEN_XTAL32_EN = 0x80000055
[00:00:11]*** Analog Control Register 0 SEN_ANA0 = 0x33560624
[00:00:11]*** Is cutter blocked?
[00:00:12]MH_GetMetrics
[00:00:12]Write to MH i2c: 00 00 00 03 00 02 
[00:00:12]Write i2c OK
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 00 29 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 00 29 00 03 00 00 03 9C 77 C0 01 31 39 30 33 53 51 38 38 54 00 00 00 00 57 25 BE FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 00 03 00 64 
[00:00:12]Are we in boot?
[00:00:12]We are not in boot now
[00:00:12]Write to MH i2c: 01 00 00 04 00 04 
[00:00:12]Write i2c OK
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 01 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 01 07 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 01 07 00 04 00 00 00 00 00 00 FF 0F 19 
[00:00:12]Model is 3
[00:00:12]MH firmware is 30620
[00:00:12]MH boot firmware is 3
[00:00:12]MH_SetPrinterDots 448
[00:00:12]HeadWidthInBytes 56
[00:00:12]maxmasksize 7
[00:00:12]Write to MH i2c: D6 06 00 05 00 41 00 60 00 FF FF 7F 
[00:00:12]Write i2c OK
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D6 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D6 01 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D6 01 00 05 00 00 DB 
[00:00:12]Write to MH i2c: D5 00 00 06 00 DA 
[00:00:12]Write i2c OK
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D5 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D5 01 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D5 01 00 06 00 00 DB 
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]ExternCall_SetCallbacks
[00:00:12]NVStorageInit
[00:00:12]MH_GetDate
[00:00:12]Write to MH i2c: F0 00 00 07 00 F6 
[00:00:12]Write i2c OK
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: F0 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: F0 09 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: F0 09 00 07 00 00 89 9F 54 66 49 6C 54 66 50 
[14:58:17]Current date/time: 27.05.2024 14:58
[14:58:17]FM_Init
[14:58:17]wFMConnect
[14:58:17]MH_SAM_On
[14:58:17]Write to MH i2c: E0 00 00 08 00 E7 
[14:58:17]Write i2c OK
[14:58:17]MH_I2C_Read...
[14:58:17]*** iso7816_init failed -2820!
[14:58:17]Read from MH i2c: E0 
[14:58:17]MH_I2C_Read...
[14:58:17]Read from MH i2c: E0 05 00 
[14:58:17]MH_I2C_Read...
[14:58:17]Read from MH i2c: E0 05 00 08 00 10 FC F4 FF FF EA 
[14:58:17]Error from MH - 10
[14:58:17]No FM detected - please insert FM
[14:58:17]DocumentArchiveInit
[14:58:17]Start Httpd...
[14:58:17]Httpd thread 3067329892 created
[14:58:17]Write to MH i2c: 01 00 00 09 00 09 
[14:58:17]Write i2c OK
[14:58:17]MH_I2C_Read...
[14:58:17]Read from MH i2c: 01 
[14:58:17]MH_I2C_Read...
[14:58:17]Read from MH i2c: 01 07 00 
[14:58:17]MH_I2C_Read...
[14:58:17]Read from MH i2c: 01 07 00 09 00 00 00 00 00 00 FF 0F 1E 
[14:58:17]No OFD sender enable setting
[14:58:17]MH Int Process started
[14:58:17]Allocated Socket 7
[14:58:17]Bind OK
[14:58:17]Listen OK
[14:58:17]httpd running on port 8080
[14:58:17]Waiting for new connection...
[14:58:22]No OFD sender enable setting
[14:58:27]No OFD sender enable setting
[14:58:32]No OFD sender enable setting
[14:58:37]No OFD sender enable setting
[14:58:39]*** Cut start
[14:58:39]*** Partial cut
[14:58:39]*** CUTSNS_PIN = 1
[14:58:39]*** CUTSNS_PIN = 0
[14:58:39]*** Brake cut motor
[14:58:39]*** Stop cut motor
[14:58:39]*** Cut end
[14:58:41]*** Cut start
[14:58:41]*** Partial cut
[14:58:41]*** CUTSNS_PIN = 1
[14:58:41]*** CUTSNS_PIN = 0
[14:58:41]*** Brake cut motor
[14:58:41]*** Stop cut motor
[14:58:41]*** Cut end
[14:58:42]No OFD sender enable setting
[14:58:47]No OFD sender enable setting
[14:58:52]No OFD sender enable setting
[14:58:57]No OFD sender enable setting
[14:59:02]No OFD sender enable setting
[14:59:04]*** Cut start
[14:59:04]*** Partial cut
[14:59:04]*** CUTSNS_PIN = 1
[14:59:04]*** CUTSNS_PIN = 0
[14:59:04]*** Brake cut motor
[14:59:04]*** Stop cut motor
[14:59:04]*** Cut end
[14:59:05]*** Cut start
[14:59:05]*** Partial cut
[14:59:05]*** CUTSNS_PIN = 1
[14:59:05]*** CUTSNS_PIN = 0
[14:59:05]*** Brake cut motor
[14:59:05]*** Stop cut motor
[14:59:05]*** Cut end
[14:59:06]*** Cut start
[14:59:06]*** Partial cut
[14:59:06]*** CUTSNS_PIN = 1
[14:59:06]*** CUTSNS_PIN = 0
[14:59:06]*** Brake cut motor
[14:59:06]*** Stop cut motor
[14:59:06]*** Cut end
[14:59:07]No OFD sender enable setting
[14:59:09]*** Cut start
[14:59:09]*** Partial cut
[14:59:09]*** CUTSNS_PIN = 1
[14:59:09]*** CUTSNS_PIN = 0
[14:59:09]*** Brake cut motor
[14:59:09]*** Stop cut motor
[14:59:09]*** Cut end
[14:59:11]*** Cut start
[14:59:11]*** Partial cut
[14:59:11]*** CUTSNS_PIN = 1
[14:59:11]*** CUTSNS_PIN = 0
[14:59:11]*** Brake cut motor
[14:59:12]*** Stop cut motor
[14:59:12]*** Cut end
[14:59:12]No OFD sender enable setting
[14:59:12]*** Cut start
[14:59:12]*** Partial cut
[14:59:12]*** CUTSNS_PIN = 1
[14:59:12]*** CUTSNS_PIN = 0
[14:59:12]*** Brake cut motor
[14:59:12]*** Stop cut motor
[14:59:12]*** Cut end
[14:59:14]*** Cut start
[14:59:14]*** Partial cut
[14:59:14]*** CUTSNS_PIN = 1
[14:59:14]*** CUTSNS_PIN = 0
[14:59:15]*** Brake cut motor
[14:59:15]*** Stop cut motor
[14:59:15]*** Cut end
[14:59:15]*** Cut start
[14:59:15]*** Partial cut
[14:59:15]*** CUTSNS_PIN = 1
[14:59:15]*** CUTSNS_PIN = 0
[14:59:15]*** Brake cut motor
[14:59:16]*** Stop cut motor
[14:59:16]*** Cut end
[14:59:17]No OFD sender enable setting
[14:59:17]*** Cut start
[14:59:17]*** Partial cut
[14:59:17]*** CUTSNS_PIN = 1
[14:59:17]*** CUTSNS_PIN = 0
[14:59:17]*** Brake cut motor
[14:59:18]*** Stop cut motor
[14:59:18]*** Cut end
[14:59:22]No OFD sender enable setting