[00:00:09]

*** EcrCore started. Build 196 ***
[00:00:09]/dev/ttyS4 opened
[00:00:09]MH_InterfaceInit /dev/i2c-1
[00:00:09]Malloc ok
[00:00:09]MH_GetMetrics
[00:00:09]Write to MH i2c: 00 00 00 01 00 00 
[00:00:09]Write i2c OK
[00:00:09]MH_I2C_Read...
[00:00:09]Read from MH i2c: 00 
[00:00:09]MH_I2C_Read...
[00:00:09]Read from MH i2c: 00 29 00 
[00:00:09]MH_I2C_Read...
[00:00:09]Read from MH i2c: 00 29 00 01 00 00 03 9C 77 C0 01 31 39 30 33 53 51 38 38 54 00 00 00 00 57 25 8B FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 01 03 00 30 
[00:00:09]Are we in boot?
[00:00:09]We are in boot - try to switch
[00:00:09]Write to MH i2c: A0 00 00 02 00 A1 
[00:00:09]Write i2c OK
[00:00:09]MH_I2C_Read...
[00:00:09]*** Check firmware version 30620, crc_r 49A1A6DB, crc_c: 49A1A6DB, size: 53248
[00:00:09]*** 
[00:00:09]Read from MH i2c: A0 
[00:00:09]MH_I2C_Read...
[00:00:09]Read from MH i2c: A0 01 00 
[00:00:09]MH_I2C_Read...
[00:00:09]Read from MH i2c: A0 01 00 02 00 00 A2 
[00:00:09]*** Starting fw at address 01020100 (2007E328 010249C5)
[00:00:09]*** Waiting for read because exit forced
[00:00:09]*** 10 ms more...
[00:00:10]*** MH1903S init start (LINUX_LIGHT)
[00:00:10]*** Compilation Date Jun 20 2023 Time 12:36:20
[00:00:10]*** Serial: 3139303353513838 540000000057258B (1903SQ88T)
[00:00:10]*** User serial: FFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFF (ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ)
[00:00:10]*** step 0: 5000 (2650, 2350 REF)
[00:00:10]*** step 1: 4835 (2500, 2335 REF)
[00:00:10]*** step 2: 4676 (2440, 2236 REF)
[00:00:10]*** step 3: 4523 (2280, 2243 REF)
[00:00:10]*** step 4: 4376 (2160, 2216 REF)
[00:00:10]*** step 5: 4235 (2050, 2185 REF)
[00:00:10]*** step 6: 4098 (1950, 2148 REF)
[00:00:10]*** step 7: 3967 (1870, 2097 REF)
[00:00:10]*** step 8: 3840 (1828, 2012 REF)
[00:00:10]*** step 9: 3719 (1728, 1991 REF)
[00:00:10]*** step 10: 3601 (1675, 1926 REF)
[00:00:10]*** step 11: 3488 (1635, 1853 REF)
[00:00:10]*** step 12: 3379 (1595, 1784 REF)
[00:00:10]*** step 13: 3275 (1565, 1710 REF)
[00:00:10]*** step 14: 3174 (1543, 1631 REF)
[00:00:10]*** step 15: 3077 (1523, 1554 REF)
[00:00:10]*** step 16: 2983 (1503, 1480 REF)
[00:00:10]*** step 17: 2893 (1486, 1407 REF)
[00:00:10]*** step 18: 2806 (1466, 1340 REF)
[00:00:10]*** step 19: 2723 (1426, 1297 REF)
[00:00:10]*** step 20: 2642 (1406, 1236 REF)
[00:00:10]*** step 21: 2565 (1384, 1181 REF)
[00:00:10]*** step 22: 2490 (1364, 1126 REF)
[00:00:10]*** step 23: 2418 (1344, 1074 REF)
[00:00:10]*** step 24: 2349 (1322, 1027 REF)
[00:00:10]*** step 25: 2283 (1302, 981 REF)
[00:00:10]*** step 26: 2218 (1282, 936 REF)
[00:00:10]*** step 27: 2157 (1262, 895 REF)
[00:00:10]*** step 28: 2097 (1242, 855 REF)
[00:00:10]*** step 29: 2040 (1222, 818 REF)
[00:00:10]*** step 30: 1985 (1202, 783 REF)
[00:00:10]*** step 31: 1932 (1191, 741 REF)
[00:00:10]*** step 32: 1880 (1181, 699 REF)
[00:00:10]*** step 33: 1831 (1171, 660 REF)
[00:00:10]*** step 34: 1784 (1161, 623 REF)
[00:00:10]*** step 35: 1738 (1151, 587 REF)
[00:00:10]*** step 36: 1694 (1141, 553 REF)
[00:00:10]*** step 37: 1652 (1131, 521 REF)
[00:00:10]*** step 38: 1611 (1121, 490 REF)
[00:00:10]*** step 39: 1572 (1111, 461 REF)
[00:00:10]*** step 40: 1534 (1103, 431 REF)
[00:00:10]*** step 41: 1497 (1093, 404 REF)
[00:00:10]*** step 42: 1462 (1083, 379 REF)
[00:00:10]*** step 43: 1428 (1073, 355 REF)
[00:00:10]*** step 44: 1396 (1063, 333 REF)
[00:00:10]*** step 45: 1365 (1053, 312 REF)
[00:00:10]*** step 46: 1334 (1043, 291 REF)
[00:00:10]*** step 47: 1305 (1033, 272 REF)
[00:00:10]*** step 48: 1277 (1023, 254 REF)
[00:00:10]*** step 49: 1250 (1013, 237 REF)
[00:00:10]*** step 50: 1224 (990, 234 REF)
[00:00:10]*** step 51: 1199 (980, 219 REF)
[00:00:10]*** step 52: 1175 (970, 205 REF)
[00:00:10]*** step 53: 1152 (960, 192 REF)
[00:00:10]*** step 54: 1130 (950, 180 REF)
[00:00:10]*** step 55: 1108 (940, 168 REF)
[00:00:10]*** step 56: 1088 (930, 158 REF)
[00:00:10]*** step 57: 1068 (920, 148 REF)
[00:00:10]*** step 58: 1049 (910, 139 REF)
[00:00:10]*** step 59: 1030 (900, 130 REF)
[00:00:10]*** step 60: 1012 (890, 122 REF)
[00:00:10]*** step 61: 995 (880, 115 REF)
[00:00:10]*** step 62: 979 (870, 109 REF)
[00:00:10]*** step 63: 963 (860, 103 REF)
[00:00:10]*** step 64: 948 (850, 98 REF)
[00:00:10]*** step 65: 933 (840, 93 REF)
[00:00:10]*** step 66: 919 (830, 89 REF)
[00:00:10]*** step 67: 905 (820, 85 REF)
[00:00:10]*** step 68: 892 (810, 82 REF)
[00:00:10]*** step 69: 879 (800, 79 REF)
[00:00:10]*** step 70: 867 (790, 77 REF)
[00:00:10]*** step 71: 855 (780, 75 REF)
[00:00:10]*** step 72: 844 (770, 74 REF)
[00:00:10]*** step 73: 833 (760, 73 REF)
[00:00:10]*** step 74: 822 (750, 72 REF)
[00:00:10]*** step 75: 812 (740, 72 REF)
[00:00:10]*** step 76: 803 (730, 73 REF)
[00:00:10]*** step 77: 793 (720, 73 REF)
[00:00:10]*** step 78: 784 (710, 74 REF)
[00:00:10]*** step 79: 776 (700, 76 REF)
[00:00:10]*** step 80: 767 (690, 77 REF)
[00:00:10]*** step 81: 759 (680, 79 REF)
[00:00:10]*** step 82: 751 (670, 81 REF)
[00:00:10]*** step 83: 744 (660, 84 REF)
[00:00:10]*** step 84: 737 (650, 87 REF)
[00:00:10]*** step 85: 730 (640, 90 REF)
[00:00:10]*** step 86: 723 (630, 93 REF)
[00:00:10]*** step 87: 717 (620, 97 REF)
[00:00:10]*** step 88: 710 (610, 100 REF)
[00:00:10]*** step 89: 705 (600, 105 REF)
[00:00:10]*** step 90: 699
[00:00:10]*** step 91: 693
[00:00:10]*** step 92: 688
[00:00:10]*** step 93: 683
[00:00:10]*** step 94: 678
[00:00:10]*** step 95: 673
[00:00:10]*** step 96: 669
[00:00:10]*** step 97: 664
[00:00:10]*** step 98: 660
[00:00:10]*** step 99: 656
[00:00:10]*** step 100: 652
[00:00:10]*** step 101: 648
[00:00:10]*** step 102: 644
[00:00:10]*** step 103: 641
[00:00:10]*** step 104: 638
[00:00:10]*** step 105: 634
[00:00:10]*** step 106: 631
[00:00:10]*** step 107: 628
[00:00:10]*** step 108: 625
[00:00:10]*** step 109: 622
[00:00:10]*** step 110: 620
[00:00:10]*** step 111: 617
[00:00:10]*** step 112: 615
[00:00:10]*** step 113: 612
[00:00:10]*** step 114: 610
[00:00:10]*** step 115: 608
[00:00:10]*** step 116: 605
[00:00:10]*** step 117: 603
[00:00:10]*** step 118: 601
[00:00:10]*** step 119: 599
[00:00:10]*** printer: Printer HW initialized
[00:00:10]*** initSamCard finished
[00:00:10]*** RTC: 11727341+1717373615=1729100956
[00:00:10]*** BPK Status Register BPK_RDY = 0x0
[00:00:10]*** SEN State Register SEN_STATE = 0x200ff
[00:00:10]*** 32K Frequency Sensor Enable SEN_XTAL32_EN = 0x80000055
[00:00:10]*** Analog Control Register 0 SEN_ANA0 = 0x33540624
[00:00:10]*** Is cutter blocked?
[00:00:10]MH_GetMetrics
[00:00:10]Write to MH i2c: 00 00 00 03 00 02 
[00:00:10]Write i2c OK
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: 00 
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: 00 29 00 
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: 00 29 00 03 00 00 03 9C 77 C0 01 31 39 30 33 53 51 38 38 54 00 00 00 00 57 25 8B FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 00 03 00 31 
[00:00:10]Are we in boot?
[00:00:10]We are not in boot now
[00:00:10]Write to MH i2c: 01 00 00 04 00 04 
[00:00:10]Write i2c OK
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: 01 
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: 01 07 00 
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: 01 07 00 04 00 00 00 00 00 00 FF 0F 19 
[00:00:10]Model is 3
[00:00:10]MH firmware is 30620
[00:00:10]MH boot firmware is 3
[00:00:10]MH_SetPrinterDots 448
[00:00:10]HeadWidthInBytes 56
[00:00:10]maxmasksize 7
[00:00:10]Write to MH i2c: D6 06 00 05 00 41 00 60 00 FF FF 7F 
[00:00:10]Write i2c OK
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: D6 
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: D6 01 00 
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: D6 01 00 05 00 00 DB 
[00:00:10]Write to MH i2c: D5 00 00 06 00 DA 
[00:00:10]Write i2c OK
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: D5 
[00:00:10]MH_I2C_Read...
[00:00:11]Read from MH i2c: D5 01 00 
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: D5 01 00 06 00 00 DB 
[00:00:11]Load OK
[00:00:11]LoadDictionaryFromArray
[00:00:11]Load OK
[00:00:11]LoadDictionaryFromArray
[00:00:11]Load OK
[00:00:11]LoadDictionaryFromArray
[00:00:11]Load OK
[00:00:11]LoadDictionaryFromArray
[00:00:11]Load OK
[00:00:11]LoadDictionaryFromArray
[00:00:11]Load OK
[00:00:11]LoadDictionaryFromArray
[00:00:11]Load OK
[00:00:11]LoadDictionaryFromArray
[00:00:11]Load OK
[00:00:11]LoadDictionaryFromArray
[00:00:11]Load OK
[00:00:11]LoadDictionaryFromArray
[00:00:11]Load OK
[00:00:11]LoadDictionaryFromArray
[00:00:11]Load OK
[00:00:11]LoadDictionaryFromArray
[00:00:11]Load OK
[00:00:11]LoadDictionaryFromArray
[00:00:11]Load OK
[00:00:11]ExternCall_SetCallbacks
[00:00:11]NVStorageInit
[00:00:11]No nvstorage dir found. Trying to create it.
[00:00:11]Nvstorage dir /storage created.
[00:00:11]MH_GetDate
[00:00:11]Write to MH i2c: F0 00 00 07 00 F6 
[00:00:11]Write i2c OK
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: F0 
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: F0 09 00 
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: F0 09 00 07 00 00 9D FC 0F 67 AF 0A 5D 66 8A 
[17:49:17]Current date/time: 16.10.2024 17:49
[17:49:17]FM_Init
[17:49:17]wFMConnect
[17:49:17]MH_SAM_On
[17:49:17]Write to MH i2c: E0 00 00 08 00 E7 
[17:49:17]Write i2c OK
[17:49:17]MH_I2C_Read...
[17:49:17]*** iso7816_init failed -2820!
[17:49:17]Read from MH i2c: E0 
[17:49:17]MH_I2C_Read...
[17:49:17]Read from MH i2c: E0 05 00 
[17:49:17]MH_I2C_Read...
[17:49:17]Read from MH i2c: E0 05 00 08 00 10 FC F4 FF FF EA 
[17:49:17]Error from MH - 10
[17:49:17]No FM detected - please insert FM
[17:49:17]DocumentArchiveInit
[17:49:17]Start Httpd...
[17:49:17]Httpd thread 3067567460 created
[17:49:17]Write to MH i2c: 01 00 00 09 00 09 
[17:49:17]Write i2c OK
[17:49:17]MH_I2C_Read...
[17:49:17]Read from MH i2c: 01 
[17:49:17]MH_I2C_Read...
[17:49:17]Read from MH i2c: 01 07 00 
[17:49:17]MH_I2C_Read...
[17:49:17]Read from MH i2c: 01 07 00 09 00 00 00 00 00 00 FF 0F 1E 
[17:49:17]No OFD sender enable setting
[17:49:17]MH Int Process started
[17:49:17]Allocated Socket 7
[17:49:17]Bind OK
[17:49:17]Listen OK
[17:49:17]httpd running on port 8080
[17:49:17]Waiting for new connection...
[17:49:22]No OFD sender enable setting
[17:49:27]No OFD sender enable setting
[17:49:32]No OFD sender enable setting
[17:49:37]No OFD sender enable setting
[17:49:42]No OFD sender enable setting
[17:49:47]No OFD sender enable setting
[17:49:52]No OFD sender enable setting
[17:49:57]No OFD sender enable setting
[17:50:02]No OFD sender enable setting
[17:50:07]No OFD sender enable setting
[17:50:12]No OFD sender enable setting
[17:50:17]No OFD sender enable setting
[17:50:22]No OFD sender enable setting
[17:50:27]No OFD sender enable setting
[17:50:32]No OFD sender enable setting
[17:50:37]No OFD sender enable setting
[17:50:42]No OFD sender enable setting
[17:50:47]No OFD sender enable setting
[17:50:52]No OFD sender enable setting
[17:50:57]No OFD sender enable setting
[17:51:02]No OFD sender enable setting
[17:51:07]No OFD sender enable setting
[17:51:12]No OFD sender enable setting
[17:51:17]No OFD sender enable setting
[17:51:22]No OFD sender enable setting
[17:51:27]No OFD sender enable setting
[17:51:32]No OFD sender enable setting
[17:51:37]No OFD sender enable setting
[17:51:42]No OFD sender enable setting
[17:51:47]No OFD sender enable setting
[17:51:52]No OFD sender enable setting
[17:51:57]No OFD sender enable setting
[17:52:02]No OFD sender enable setting
[17:52:07]No OFD sender enable setting
[17:52:12]No OFD sender enable setting
[17:52:17]No OFD sender enable setting
[17:52:22]No OFD sender enable setting
[17:52:27]No OFD sender enable setting
[17:52:32]No OFD sender enable setting
[17:52:37]No OFD sender enable setting
[17:52:42]No OFD sender enable setting
[17:52:47]No OFD sender enable setting
[17:52:52]No OFD sender enable setting
[17:52:57]No OFD sender enable setting
[17:53:02]No OFD sender enable setting
[17:53:07]No OFD sender enable setting
[17:53:12]No OFD sender enable setting
[17:53:17]No OFD sender enable setting
[17:53:22]No OFD sender enable setting
[17:53:27]No OFD sender enable setting
[17:53:32]No OFD sender enable setting
[17:53:37]No OFD sender enable setting
[17:53:42]No OFD sender enable setting
[17:53:47]No OFD sender enable setting
[17:53:52]No OFD sender enable setting
[17:53:57]No OFD sender enable setting
[17:54:02]No OFD sender enable setting
[17:54:07]No OFD sender enable setting
[17:54:12]No OFD sender enable setting
[17:54:17]No OFD sender enable setting
[17:54:22]No OFD sender enable setting
[17:54:27]No OFD sender enable setting
[17:54:32]No OFD sender enable setting
[17:54:37]No OFD sender enable setting
[17:54:42]No OFD sender enable setting
[17:54:47]No OFD sender enable setting
[17:54:52]No OFD sender enable setting
[17:54:57]No OFD sender enable setting
[17:55:02]No OFD sender enable setting
[17:55:07]No OFD sender enable setting
[17:55:12]No OFD sender enable setting
[17:55:17]No OFD sender enable setting
[17:55:22]No OFD sender enable setting
[17:55:27]No OFD sender enable setting
[17:55:32]No OFD sender enable setting
[17:55:37]No OFD sender enable setting
[17:55:42]No OFD sender enable setting
[17:55:47]No OFD sender enable setting
[17:55:52]No OFD sender enable setting
[17:55:57]No OFD sender enable setting
[17:56:02]No OFD sender enable setting
[17:56:07]No OFD sender enable setting
[17:56:12]No OFD sender enable setting
[17:56:17]No OFD sender enable setting
[17:56:22]No OFD sender enable setting
[17:56:27]No OFD sender enable setting
[17:56:32]No OFD sender enable setting
[17:56:37]No OFD sender enable setting
[17:56:42]No OFD sender enable setting
[17:56:47]No OFD sender enable setting
[17:56:52]No OFD sender enable setting
[17:56:57]No OFD sender enable setting
[17:57:02]No OFD sender enable setting
[17:57:07]No OFD sender enable setting
[17:57:12]No OFD sender enable setting
[17:57:17]No OFD sender enable setting
[17:57:22]No OFD sender enable setting
[17:57:27]No OFD sender enable setting
[17:57:32]No OFD sender enable setting
[17:57:37]No OFD sender enable setting
[17:57:42]No OFD sender enable setting
[17:57:47]No OFD sender enable setting
[17:57:52]No OFD sender enable setting
[17:57:57]No OFD sender enable setting
[17:58:02]No OFD sender enable setting
[17:58:07]No OFD sender enable setting
[17:58:12]No OFD sender enable setting
[17:58:17]No OFD sender enable setting
[17:58:22]No OFD sender enable setting
[17:58:27]No OFD sender enable setting
[17:58:32]No OFD sender enable setting
[17:58:37]No OFD sender enable setting
[17:58:42]No OFD sender enable setting
[17:58:47]No OFD sender enable setting
[17:58:52]No OFD sender enable setting
[17:58:57]No OFD sender enable setting
[17:59:02]No OFD sender enable setting
[17:59:07]No OFD sender enable setting
[17:59:12]No OFD sender enable setting
[17:59:17]No OFD sender enable setting
[17:59:22]No OFD sender enable setting
[17:59:27]No OFD sender enable setting
[17:59:32]No OFD sender enable setting
[17:59:37]No OFD sender enable setting
[17:59:42]No OFD sender enable setting
[17:59:47]No OFD sender enable setting
[17:59:52]No OFD sender enable setting
[17:59:57]No OFD sender enable setting
[18:00:02]No OFD sender enable setting
[18:00:07]No OFD sender enable setting
[18:00:12]No OFD sender enable setting
[18:00:17]No OFD sender enable setting
[18:00:22]No OFD sender enable setting
[18:00:27]No OFD sender enable setting
[18:00:32]No OFD sender enable setting
[18:00:37]No OFD sender enable setting
[18:00:42]No OFD sender enable setting
[18:00:47]No OFD sender enable setting
[18:00:52]No OFD sender enable setting
[18:00:57]No OFD sender enable setting
[18:01:02]No OFD sender enable setting
[18:01:07]No OFD sender enable setting
[18:01:12]No OFD sender enable setting
[18:01:17]No OFD sender enable setting
[18:01:22]No OFD sender enable setting
[18:01:27]No OFD sender enable setting
[18:01:32]No OFD sender enable setting
[18:01:37]No OFD sender enable setting
[18:01:42]No OFD sender enable setting
[18:01:47]No OFD sender enable setting
[18:01:52]No OFD sender enable setting
[18:01:57]No OFD sender enable setting
[18:02:02]No OFD sender enable setting
[18:02:07]No OFD sender enable setting
[18:02:12]No OFD sender enable setting
[18:02:17]No OFD sender enable setting
[18:02:22]No OFD sender enable setting
[18:02:27]No OFD sender enable setting
[18:02:32]No OFD sender enable setting
[18:02:37]No OFD sender enable setting
[18:02:42]No OFD sender enable setting
[18:02:47]No OFD sender enable setting
[18:02:52]No OFD sender enable setting
[18:02:57]No OFD sender enable setting
[18:03:02]No OFD sender enable setting
[18:03:07]No OFD sender enable setting
[18:03:12]No OFD sender enable setting
[18:03:17]No OFD sender enable setting
[18:03:22]No OFD sender enable setting
[18:03:27]No OFD sender enable setting
[18:03:32]No OFD sender enable setting
[18:03:37]No OFD sender enable setting
[18:03:42]No OFD sender enable setting
[18:03:47]No OFD sender enable setting
[18:03:52]No OFD sender enable setting
[18:03:57]No OFD sender enable setting
[18:04:02]No OFD sender enable setting
[18:04:07]No OFD sender enable setting
[18:04:12]No OFD sender enable setting
[18:04:17]No OFD sender enable setting
[18:04:22]No OFD sender enable setting
[18:04:27]No OFD sender enable setting
[18:04:32]No OFD sender enable setting
[18:04:37]No OFD sender enable setting
[18:04:42]No OFD sender enable setting
[18:04:47]No OFD sender enable setting
[18:04:52]No OFD sender enable setting
[18:04:57]No OFD sender enable setting
[18:05:02]No OFD sender enable setting
[18:05:07]No OFD sender enable setting
[18:05:12]No OFD sender enable setting
[18:05:17]No OFD sender enable setting
[18:05:22]No OFD sender enable setting
[18:05:27]No OFD sender enable setting
[18:05:32]No OFD sender enable setting
[18:05:37]No OFD sender enable setting
[18:05:42]No OFD sender enable setting
[18:05:47]No OFD sender enable setting
[18:05:52]No OFD sender enable setting
[18:05:57]No OFD sender enable setting
[18:06:02]No OFD sender enable setting
[18:06:07]No OFD sender enable setting
[18:06:12]No OFD sender enable setting
[18:06:17]No OFD sender enable setting
[18:06:22]No OFD sender enable setting
[18:06:27]No OFD sender enable setting
[18:06:32]No OFD sender enable setting
[18:06:37]No OFD sender enable setting
[18:06:42]No OFD sender enable setting
[18:06:47]No OFD sender enable setting
[18:06:52]No OFD sender enable setting
[00:00:08]

*** EcrCore started. Build 196 ***
[00:00:08]/dev/ttyS4 opened
[00:00:08]MH_InterfaceInit /dev/i2c-1
[00:00:08]Malloc ok
[00:00:08]MH_GetMetrics
[00:00:08]Write to MH i2c: 00 00 00 01 00 00 
[00:00:08]Write i2c OK
[00:00:08]MH_I2C_Read...
[00:00:08]Read from MH i2c: 00 
[00:00:08]MH_I2C_Read...
[00:00:08]Read from MH i2c: 00 29 00 
[00:00:08]MH_I2C_Read...
[00:00:08]Read from MH i2c: 00 29 00 01 00 00 03 9C 77 C0 01 31 39 30 33 53 51 38 38 54 00 00 00 00 57 25 8B FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 01 03 00 30 
[00:00:08]Are we in boot?
[00:00:08]We are in boot - try to switch
[00:00:08]Write to MH i2c: A0 00 00 02 00 A1 
[00:00:08]Write i2c OK
[00:00:08]MH_I2C_Read...
[00:00:09]Read from MH i2c: A0 
[00:00:09]MH_I2C_Read...
[00:00:09]Read from MH i2c: A0 01 00 
[00:00:09]MH_I2C_Read...
[00:00:09]*** Check firmware version 30620, crc_r 49A1A6DB, crc_c: 49A1A6DB, size: 53248
[00:00:09]*** 
[00:00:09]Read from MH i2c: A0 01 00 02 00 00 A2 
[00:00:09]*** Starting fw at address 01020100 (2007E328 010249C5)
[00:00:09]*** Waiting for read because exit forced
[00:00:09]*** 10 ms more...
[00:00:09]*** MH1903S init start (LINUX_LIGHT)
[00:00:09]*** Compilation Date Jun 20 2023 Time 12:36:20
[00:00:09]*** Serial: 3139303353513838 540000000057258B (1903SQ88T)
[00:00:09]*** User serial: FFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFF (ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ)
[00:00:09]*** step 0: 5000 (2650, 2350 REF)
[00:00:09]*** step 1: 4835 (2500, 2335 REF)
[00:00:09]*** step 2: 4676 (2440, 2236 REF)
[00:00:09]*** step 3: 4523 (2280, 2243 REF)
[00:00:09]*** step 4: 4376 (2160, 2216 REF)
[00:00:09]*** step 5: 4235 (2050, 2185 REF)
[00:00:09]*** step 6: 4098 (1950, 2148 REF)
[00:00:09]*** step 7: 3967 (1870, 2097 REF)
[00:00:09]*** step 8: 3840 (1828, 2012 REF)
[00:00:09]*** step 9: 3719 (1728, 1991 REF)
[00:00:09]*** step 10: 3601 (1675, 1926 REF)
[00:00:09]*** step 11: 3488 (1635, 1853 REF)
[00:00:09]*** step 12: 3379 (1595, 1784 REF)
[00:00:09]*** step 13: 3275 (1565, 1710 REF)
[00:00:09]*** step 14: 3174 (1543, 1631 REF)
[00:00:09]*** step 15: 3077 (1523, 1554 REF)
[00:00:09]*** step 16: 2983 (1503, 1480 REF)
[00:00:09]*** step 17: 2893 (1486, 1407 REF)
[00:00:09]*** step 18: 2806 (1466, 1340 REF)
[00:00:09]*** step 19: 2723 (1426, 1297 REF)
[00:00:09]*** step 20: 2642 (1406, 1236 REF)
[00:00:09]*** step 21: 2565 (1384, 1181 REF)
[00:00:09]*** step 22: 2490 (1364, 1126 REF)
[00:00:09]*** step 23: 2418 (1344, 1074 REF)
[00:00:09]*** step 24: 2349 (1322, 1027 REF)
[00:00:09]*** step 25: 2283 (1302, 981 REF)
[00:00:09]*** step 26: 2218 (1282, 936 REF)
[00:00:09]*** step 27: 2157 (1262, 895 REF)
[00:00:09]*** step 28: 2097 (1242, 855 REF)
[00:00:09]*** step 29: 2040 (1222, 818 REF)
[00:00:09]*** step 30: 1985 (1202, 783 REF)
[00:00:09]*** step 31: 1932 (1191, 741 REF)
[00:00:09]*** step 32: 1880 (1181, 699 REF)
[00:00:09]*** step 33: 1831 (1171, 660 REF)
[00:00:09]*** step 34: 1784 (1161, 623 REF)
[00:00:09]*** step 35: 1738 (1151, 587 REF)
[00:00:09]*** step 36: 1694 (1141, 553 REF)
[00:00:09]*** step 37: 1652 (1131, 521 REF)
[00:00:09]*** step 38: 1611 (1121, 490 REF)
[00:00:09]*** step 39: 1572 (1111, 461 REF)
[00:00:09]*** step 40: 1534 (1103, 431 REF)
[00:00:09]*** step 41: 1497 (1093, 404 REF)
[00:00:09]*** step 42: 1462 (1083, 379 REF)
[00:00:09]*** step 43: 1428 (1073, 355 REF)
[00:00:09]*** step 44: 1396 (1063, 333 REF)
[00:00:09]*** step 45: 1365 (1053, 312 REF)
[00:00:09]*** step 46: 1334 (1043, 291 REF)
[00:00:09]*** step 47: 1305 (1033, 272 REF)
[00:00:09]*** step 48: 1277 (1023, 254 REF)
[00:00:09]*** step 49: 1250 (1013, 237 REF)
[00:00:09]*** step 50: 1224 (990, 234 REF)
[00:00:09]*** step 51: 1199 (980, 219 REF)
[00:00:09]*** step 52: 1175 (970, 205 REF)
[00:00:09]*** step 53: 1152 (960, 192 REF)
[00:00:09]*** step 54: 1130 (950, 180 REF)
[00:00:09]*** step 55: 1108 (940, 168 REF)
[00:00:09]*** step 56: 1088 (930, 158 REF)
[00:00:09]*** step 57: 1068 (920, 148 REF)
[00:00:09]*** step 58: 1049 (910, 139 REF)
[00:00:09]*** step 59: 1030 (900, 130 REF)
[00:00:09]*** step 60: 1012 (890, 122 REF)
[00:00:09]*** step 61: 995 (880, 115 REF)
[00:00:09]*** step 62: 979 (870, 109 REF)
[00:00:09]*** step 63: 963 (860, 103 REF)
[00:00:09]*** step 64: 948 (850, 98 REF)
[00:00:09]*** step 65: 933 (840, 93 REF)
[00:00:09]*** step 66: 919 (830, 89 REF)
[00:00:09]*** step 67: 905 (820, 85 REF)
[00:00:09]*** step 68: 892 (810, 82 REF)
[00:00:09]*** step 69: 879 (800, 79 REF)
[00:00:09]*** step 70: 867 (790, 77 REF)
[00:00:09]*** step 71: 855 (780, 75 REF)
[00:00:09]*** step 72: 844 (770, 74 REF)
[00:00:09]*** step 73: 833 (760, 73 REF)
[00:00:09]*** step 74: 822 (750, 72 REF)
[00:00:09]*** step 75: 812 (740, 72 REF)
[00:00:09]*** step 76: 803 (730, 73 REF)
[00:00:09]*** step 77: 793 (720, 73 REF)
[00:00:09]*** step 78: 784 (710, 74 REF)
[00:00:09]*** step 79: 776 (700, 76 REF)
[00:00:09]*** step 80: 767 (690, 77 REF)
[00:00:09]*** step 81: 759 (680, 79 REF)
[00:00:09]*** step 82: 751 (670, 81 REF)
[00:00:09]*** step 83: 744 (660, 84 REF)
[00:00:09]*** step 84: 737 (650, 87 REF)
[00:00:09]*** step 85: 730 (640, 90 REF)
[00:00:09]*** step 86: 723 (630, 93 REF)
[00:00:09]*** step 87: 717 (620, 97 REF)
[00:00:09]*** step 88: 710 (610, 100 REF)
[00:00:09]*** step 89: 705 (600, 105 REF)
[00:00:09]*** step 90: 699
[00:00:09]*** step 91: 693
[00:00:09]*** step 92: 688
[00:00:09]*** step 93: 683
[00:00:09]*** step 94: 678
[00:00:09]*** step 95: 673
[00:00:09]*** step 96: 669
[00:00:09]*** step 97: 664
[00:00:09]*** step 98: 660
[00:00:09]*** step 99: 656
[00:00:09]*** step 100: 652
[00:00:09]*** step 101: 648
[00:00:09]*** step 102: 644
[00:00:09]*** step 103: 641
[00:00:09]*** step 104: 638
[00:00:09]*** step 105: 634
[00:00:09]*** step 106: 631
[00:00:09]*** step 107: 628
[00:00:09]*** step 108: 625
[00:00:09]*** step 109: 622
[00:00:09]*** step 110: 620
[00:00:09]*** step 111: 617
[00:00:09]*** step 112: 615
[00:00:09]*** step 113: 612
[00:00:09]*** step 114: 610
[00:00:09]*** step 115: 608
[00:00:09]*** step 116: 605
[00:00:09]*** step 117: 603
[00:00:09]*** step 118: 601
[00:00:09]*** step 119: 599
[00:00:09]*** printer: Printer HW initialized
[00:00:09]*** initSamCard finished
[00:00:09]*** RTC: 11728416+1717373615=1729102031
[00:00:09]*** BPK Status Register BPK_RDY = 0x0
[00:00:09]*** SEN State Register SEN_STATE = 0x200ff
[00:00:09]*** 32K Frequency Sensor Enable SEN_XTAL32_EN = 0x80000055
[00:00:09]*** Analog Control Register 0 SEN_ANA0 = 0x33540624
[00:00:09]*** Is cutter blocked?
[00:00:10]MH_GetMetrics
[00:00:10]Write to MH i2c: 00 00 00 03 00 02 
[00:00:10]Write i2c OK
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: 00 
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: 00 29 00 
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: 00 29 00 03 00 00 03 9C 77 C0 01 31 39 30 33 53 51 38 38 54 00 00 00 00 57 25 8B FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 00 03 00 31 
[00:00:10]Are we in boot?
[00:00:10]We are not in boot now
[00:00:10]Write to MH i2c: 01 00 00 04 00 04 
[00:00:10]Write i2c OK
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: 01 
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: 01 07 00 
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: 01 07 00 04 00 00 00 00 00 00 FF 0F 19 
[00:00:10]Model is 3
[00:00:10]MH firmware is 30620
[00:00:10]MH boot firmware is 3
[00:00:10]MH_SetPrinterDots 448
[00:00:10]HeadWidthInBytes 56
[00:00:10]maxmasksize 7
[00:00:10]Write to MH i2c: D6 06 00 05 00 41 00 60 00 FF FF 7F 
[00:00:10]Write i2c OK
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: D6 
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: D6 01 00 
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: D6 01 00 05 00 00 DB 
[00:00:10]Write to MH i2c: D5 00 00 06 00 DA 
[00:00:10]Write i2c OK
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: D5 
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: D5 01 00 
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: D5 01 00 06 00 00 DB 
[00:00:10]Load OK
[00:00:10]LoadDictionaryFromArray
[00:00:10]Load OK
[00:00:10]LoadDictionaryFromArray
[00:00:10]Load OK
[00:00:10]LoadDictionaryFromArray
[00:00:10]Load OK
[00:00:10]LoadDictionaryFromArray
[00:00:10]Load OK
[00:00:10]LoadDictionaryFromArray
[00:00:10]Load OK
[00:00:10]LoadDictionaryFromArray
[00:00:10]Load OK
[00:00:10]LoadDictionaryFromArray
[00:00:10]Load OK
[00:00:10]LoadDictionaryFromArray
[00:00:10]Load OK
[00:00:10]LoadDictionaryFromArray
[00:00:10]Load OK
[00:00:10]LoadDictionaryFromArray
[00:00:10]Load OK
[00:00:10]LoadDictionaryFromArray
[00:00:10]Load OK
[00:00:10]LoadDictionaryFromArray
[00:00:10]Load OK
[00:00:10]ExternCall_SetCallbacks
[00:00:10]NVStorageInit
[00:00:10]MH_GetDate
[00:00:10]Write to MH i2c: F0 00 00 07 00 F6 
[00:00:10]Write i2c OK
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: F0 
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: F0 09 00 
[00:00:10]MH_I2C_Read...
[00:00:10]Read from MH i2c: F0 09 00 07 00 00 CF 00 10 67 AF 0A 5D 66 C1 
[18:07:11]Current date/time: 16.10.2024 18:07
[18:07:11]FM_Init
[18:07:11]wFMConnect
[18:07:11]MH_SAM_On
[18:07:11]Write to MH i2c: E0 00 00 08 00 E7 
[18:07:11]Write i2c OK
[18:07:11]MH_I2C_Read...
[18:07:11]*** iso7816_init failed -2820!
[18:07:11]Read from MH i2c: E0 
[18:07:11]MH_I2C_Read...
[18:07:11]Read from MH i2c: E0 05 00 
[18:07:11]MH_I2C_Read...
[18:07:11]Read from MH i2c: E0 05 00 08 00 10 FC F4 FF FF EA 
[18:07:11]Error from MH - 10
[18:07:11]No FM detected - please insert FM
[18:07:11]DocumentArchiveInit
[18:07:11]Start Httpd...
[18:07:11]Httpd thread 3066973540 created
[18:07:11]Write to MH i2c: 01 00 00 09 00 09 
[18:07:11]Write i2c OK
[18:07:11]MH_I2C_Read...
[18:07:11]Read from MH i2c: 01 
[18:07:11]MH_I2C_Read...
[18:07:11]Read from MH i2c: 01 07 00 
[18:07:11]MH_I2C_Read...
[18:07:11]Read from MH i2c: 01 07 00 09 00 00 00 00 00 00 FF 0F 1E 
[18:07:11]No OFD sender enable setting
[18:07:11]MH Int Process started
[18:07:11]Allocated Socket 7
[18:07:11]Bind OK
[18:07:11]Listen OK
[18:07:11]httpd running on port 8080
[18:07:11]Waiting for new connection...
[18:07:16]No OFD sender enable setting
[18:07:21]No OFD sender enable setting
[18:07:26]No OFD sender enable setting
[18:07:31]No OFD sender enable setting
[18:07:32]*** Cut start
[18:07:32]*** Partial cut
[18:07:32]*** CUTSNS_PIN = 1
[18:07:32]*** CUTSNS_PIN = 0
[18:07:32]*** Brake cut motor
[18:07:32]*** Stop cut motor
[18:07:32]*** Cut end
[18:07:33]*** Cut start
[18:07:33]*** Partial cut
[18:07:33]*** CUTSNS_PIN = 1
[18:07:33]*** CUTSNS_PIN = 0
[18:07:33]*** Brake cut motor
[18:07:34]*** Stop cut motor
[18:07:34]*** Cut end
[18:07:34]*** Cut start
[18:07:34]*** Partial cut
[18:07:34]*** CUTSNS_PIN = 1
[18:07:34]*** CUTSNS_PIN = 0
[18:07:34]*** Brake cut motor
[18:07:34]*** Stop cut motor
[18:07:34]*** Cut end
[18:07:35]*** Cut start
[18:07:35]*** Partial cut
[18:07:35]*** CUTSNS_PIN = 1
[18:07:35]*** CUTSNS_PIN = 0
[18:07:35]*** Brake cut motor
[18:07:35]*** Stop cut motor
[18:07:35]*** Cut end
[18:07:36]*** Cut start
[18:07:36]*** Partial cut
[18:07:36]*** CUTSNS_PIN = 1
[18:07:36]No OFD sender enable setting
[18:07:36]*** CUTSNS_PIN = 0
[18:07:36]*** Brake cut motor
[18:07:36]*** Stop cut motor
[18:07:36]*** Cut end
[18:07:37]*** Cut start
[18:07:37]*** Partial cut
[18:07:37]*** CUTSNS_PIN = 1
[18:07:37]*** CUTSNS_PIN = 0
[18:07:37]*** Brake cut motor
[18:07:37]*** Stop cut motor
[18:07:37]*** Cut end
[18:07:38]int
[18:07:38]Write to MH i2c: 01 00 00 0A 00 0A 
[18:07:38]*** FLAG_PRN_PAP1 set
[18:07:38]Write i2c OK
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 07 00 
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 07 00 0A 00 00 01 00 00 00 FF 0F 20 
[18:07:38]state=0
[18:07:38]No paper
[18:07:38]int
[18:07:38]Write to MH i2c: 01 00 00 0B 00 0B 
[18:07:38]*** FLAG_PRN_PAP2 set
[18:07:38]Write i2c OK
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 07 00 
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 07 00 0B 00 00 03 00 00 00 FF 0F 23 
[18:07:38]state=0
[18:07:38]No paper
[18:07:38]Cover opened
[18:07:38]int
[18:07:38]Write to MH i2c: 01 00 00 0C 00 0C 
[18:07:38]*** FLAG_PRN_PAP2 reset
[18:07:38]Write i2c OK
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 07 00 
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 07 00 0C 00 00 01 00 00 00 FF 0F 22 
[18:07:38]state=3
[18:07:38]No paper
[18:07:38]Cover closed
[18:07:38]int
[18:07:38]Write to MH i2c: 01 00 00 0D 00 0D 
[18:07:38]*** FLAG_PRN_PAP2 set
[18:07:38]Write i2c OK
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 07 00 
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 07 00 0D 00 00 03 00 00 00 FF 0F 25 
[18:07:38]state=0
[18:07:38]No paper
[18:07:38]Cover opened
[18:07:38]int
[18:07:38]Write to MH i2c: 01 00 00 0E 00 0E 
[18:07:38]*** FLAG_PRN_PAP2 reset
[18:07:38]Write i2c OK
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 07 00 
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 07 00 0E 00 00 01 00 00 00 FF 0F 24 
[18:07:38]state=3
[18:07:38]No paper
[18:07:38]Cover closed
[18:07:38]int
[18:07:38]Write to MH i2c: 01 00 00 0F 00 0F 
[18:07:38]*** FLAG_PRN_PAP2 set
[18:07:38]Write i2c OK
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 07 00 
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 07 00 0F 00 00 03 00 00 00 FF 0F 27 
[18:07:38]state=0
[18:07:38]No paper
[18:07:38]Cover opened
[18:07:38]int
[18:07:38]Write to MH i2c: 01 00 00 10 00 10 
[18:07:38]*** FLAG_PRN_PAP2 reset
[18:07:38]Write i2c OK
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 07 00 
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 07 00 10 00 00 01 00 00 00 FF 0F 26 
[18:07:38]state=3
[18:07:38]No paper
[18:07:38]Cover closed
[18:07:38]int
[18:07:38]Write to MH i2c: 01 00 00 11 00 11 
[18:07:38]*** FLAG_PRN_PAP2 set
[18:07:38]Write i2c OK
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 07 00 
[18:07:38]MH_I2C_Read...
[18:07:38]Read from MH i2c: 01 07 00 11 00 00 03 00 00 00 FF 0F 29 
[18:07:38]state=0
[18:07:38]No paper
[18:07:38]Cover opened
[18:07:39]int
[18:07:39]Write to MH i2c: 01 00 00 12 00 12 
[18:07:39]*** FLAG_PRN_PAP2 reset
[18:07:39]Write i2c OK
[18:07:39]MH_I2C_Read...
[18:07:39]Read from MH i2c: 01 
[18:07:39]MH_I2C_Read...
[18:07:39]Read from MH i2c: 01 07 00 
[18:07:39]MH_I2C_Read...
[18:07:39]Read from MH i2c: 01 07 00 12 00 00 01 00 00 00 FF 0F 28 
[18:07:39]state=3
[18:07:39]No paper
[18:07:39]Cover closed
[18:07:39]int
[18:07:39]Write to MH i2c: 01 00 00 13 00 13 
[18:07:39]*** FLAG_PRN_PAP2 set
[18:07:39]Write i2c OK
[18:07:39]MH_I2C_Read...
[18:07:39]Read from MH i2c: 01 
[18:07:39]MH_I2C_Read...
[18:07:39]Read from MH i2c: 01 07 00 
[18:07:39]MH_I2C_Read...
[18:07:39]Read from MH i2c: 01 07 00 13 00 00 03 00 00 00 FF 0F 2B 
[18:07:39]state=0
[18:07:39]No paper
[18:07:39]Cover opened
[18:07:39]int
[18:07:39]Write to MH i2c: 01 00 00 14 00 14 
[18:07:39]*** FLAG_PRN_PAP1 reset
[18:07:39]Write i2c OK
[18:07:39]MH_I2C_Read...
[18:07:39]Read from MH i2c: 01 
[18:07:39]MH_I2C_Read...
[18:07:39]Read from MH i2c: 01 07 00 
[18:07:39]MH_I2C_Read...
[18:07:39]Read from MH i2c: 01 07 00 14 00 00 02 00 00 00 FF 0F 2B 
[18:07:39]state=3
[18:07:39]Cover opened
[18:07:41]No OFD sender enable setting
[18:07:41]*** Cut start
[18:07:41]*** Partial cut
[18:07:41]*** CUTSNS_PIN = 1
[18:07:42]*** CUTSNS_PIN = 0
[18:07:42]*** Brake cut motor
[18:07:42]*** Stop cut motor
[18:07:42]*** Cut end
[18:07:42]*** Cut start
[18:07:42]*** Partial cut
[18:07:42]*** CUTSNS_PIN = 1
[18:07:42]*** CUTSNS_PIN = 0
[18:07:42]*** Brake cut motor
[18:07:43]*** Stop cut motor
[18:07:43]*** Cut end
[18:07:43]*** Cut start
[18:07:43]*** Partial cut
[18:07:43]*** CUTSNS_PIN = 1
[18:07:43]*** CUTSNS_PIN = 0
[18:07:43]*** Brake cut motor
[18:07:43]*** Stop cut motor
[18:07:43]*** Cut end
[18:07:44]*** Cut start
[18:07:44]*** Partial cut
[18:07:44]*** CUTSNS_PIN = 1
[18:07:44]*** CUTSNS_PIN = 0
[18:07:44]*** Brake cut motor
[18:07:44]*** Stop cut motor
[18:07:44]*** Cut end
[18:07:44]Write to MH i2c: 01 00 00 15 00 15 
[18:07:44]Write i2c OK
[18:07:44]MH_I2C_Read...
[18:07:44]Read from MH i2c: 01 
[18:07:44]MH_I2C_Read...
[18:07:44]Read from MH i2c: 01 07 00 
[18:07:44]MH_I2C_Read...
[18:07:44]Read from MH i2c: 01 07 00 15 00 00 02 00 00 00 FF 0F 2C 
[18:07:44]state=3
[18:07:44]Cover opened
[18:07:44]*** Cut start
[18:07:44]*** Partial cut
[18:07:44]*** CUTSNS_PIN = 1
[18:07:45]*** CUTSNS_PIN = 0
[18:07:45]*** Brake cut motor
[18:07:45]*** Stop cut motor
[18:07:45]*** Cut end
[18:07:45]*** Cut start
[18:07:45]*** Partial cut
[18:07:45]*** CUTSNS_PIN = 1
[18:07:45]*** CUTSNS_PIN = 0
[18:07:45]*** Brake cut motor
[18:07:46]No OFD sender enable setting
[18:07:46]*** Stop cut motor
[18:07:46]*** Cut end
[18:07:46]*** Cut start
[18:07:46]*** Partial cut
[18:07:46]*** CUTSNS_PIN = 1
[18:07:46]*** CUTSNS_PIN = 0
[18:07:46]*** Brake cut motor
[18:07:47]*** Stop cut motor
[18:07:47]*** Cut end
[18:07:47]*** Cut start
[18:07:47]*** Partial cut
[18:07:47]*** CUTSNS_PIN = 1
[18:07:47]*** CUTSNS_PIN = 0
[18:07:47]*** Brake cut motor
[18:07:47]*** Stop cut motor
[18:07:47]*** Cut end
[18:07:49]Write to MH i2c: 01 00 00 16 00 16 
[18:07:49]Write i2c OK
[18:07:49]MH_I2C_Read...
[18:07:49]Read from MH i2c: 01 
[18:07:49]MH_I2C_Read...
[18:07:49]Read from MH i2c: 01 07 00 
[18:07:49]MH_I2C_Read...
[18:07:49]Read from MH i2c: 01 07 00 16 00 00 02 00 00 00 FF 0F 2D 
[18:07:49]state=3
[18:07:49]Cover opened
[18:07:51]No OFD sender enable setting
[18:07:54]Write to MH i2c: 01 00 00 17 00 17 
[18:07:54]Write i2c OK
[18:07:54]MH_I2C_Read...
[18:07:54]Read from MH i2c: 01 
[18:07:54]MH_I2C_Read...
[18:07:54]Read from MH i2c: 01 07 00 
[18:07:54]MH_I2C_Read...
[18:07:54]Read from MH i2c: 01 07 00 17 00 00 02 00 00 00 FF 0F 2E 
[18:07:54]state=3
[18:07:54]Cover opened
[18:07:56]No OFD sender enable setting
[18:07:59]Write to MH i2c: 01 00 00 18 00 18 
[18:07:59]Write i2c OK
[18:07:59]MH_I2C_Read...
[18:07:59]Read from MH i2c: 01 
[18:07:59]MH_I2C_Read...
[18:07:59]Read from MH i2c: 01 07 00 
[18:07:59]MH_I2C_Read...
[18:07:59]Read from MH i2c: 01 07 00 18 00 00 02 00 00 00 FF 0F 2F 
[18:07:59]state=3
[18:07:59]Cover opened
[18:08:01]No OFD sender enable setting
[18:08:04]Write to MH i2c: 01 00 00 19 00 19 
[18:08:04]Write i2c OK
[18:08:04]MH_I2C_Read...
[18:08:04]Read from MH i2c: 01 
[18:08:04]MH_I2C_Read...
[18:08:04]Read from MH i2c: 01 07 00 
[18:08:04]MH_I2C_Read...
[18:08:04]Read from MH i2c: 01 07 00 19 00 00 02 00 00 00 FF 0F 30 
[18:08:04]state=3
[18:08:04]Cover opened
[18:08:06]No OFD sender enable setting
[18:08:09]Write to MH i2c: 01 00 00 1A 00 1A 
[18:08:09]Write i2c OK
[18:08:09]MH_I2C_Read...
[18:08:09]Read from MH i2c: 01 
[18:08:09]MH_I2C_Read...
[18:08:09]Read from MH i2c: 01 07 00 
[18:08:09]MH_I2C_Read...
[18:08:09]Read from MH i2c: 01 07 00 1A 00 00 02 00 00 00 FF 0F 31 
[18:08:09]state=3
[18:08:09]Cover opened
[18:08:11]No OFD sender enable setting
[18:08:14]Write to MH i2c: 01 00 00 1B 00 1B 
[18:08:14]Write i2c OK
[18:08:14]MH_I2C_Read...
[18:08:14]Read from MH i2c: 01 
[18:08:14]MH_I2C_Read...
[18:08:14]Read from MH i2c: 01 07 00 
[18:08:14]MH_I2C_Read...
[18:08:14]Read from MH i2c: 01 07 00 1B 00 00 02 00 00 00 FF 0F 32 
[18:08:14]state=3
[18:08:14]Cover opened
[18:08:16]No OFD sender enable setting
[18:08:19]Write to MH i2c: 01 00 00 1C 00 1C 
[18:08:19]Write i2c OK
[18:08:19]MH_I2C_Read...
[18:08:19]Read from MH i2c: 01 
[18:08:19]MH_I2C_Read...
[18:08:19]Read from MH i2c: 01 07 00 
[18:08:19]MH_I2C_Read...
[18:08:19]Read from MH i2c: 01 07 00 1C 00 00 02 00 00 00 FF 0F 33 
[18:08:19]state=3
[18:08:19]Cover opened
[18:08:21]No OFD sender enable setting
[18:08:24]Write to MH i2c: 01 00 00 1D 00 1D 
[18:08:24]Write i2c OK
[18:08:24]MH_I2C_Read...
[18:08:24]Read from MH i2c: 01 
[18:08:24]MH_I2C_Read...
[18:08:24]Read from MH i2c: 01 07 00 
[18:08:24]MH_I2C_Read...
[18:08:24]Read from MH i2c: 01 07 00 1D 00 00 02 00 00 00 FF 0F 34 
[18:08:24]state=3
[18:08:24]Cover opened
[18:08:26]No OFD sender enable setting
[18:08:29]*** Cut start
[18:08:29]*** Partial cut
[18:08:29]*** CUTSNS_PIN = 1
[18:08:29]*** CUTSNS_PIN = 0
[18:08:29]*** Brake cut motor
[18:08:29]Write to MH i2c: 01 00 00 1E 00 1E 
[18:08:29]Write i2c OK
[18:08:29]MH_I2C_Read...
[18:08:30]Read from MH i2c: D1 
[18:08:30]MH_I2C_Read...
[18:08:30]*** Stop cut motor
[18:08:30]*** Cut end
[18:08:30]Read from MH i2c: D1 01 00 
[18:08:30]answer for other command [D1]
[18:08:30]MH Int Process stopped
[18:08:30]*** Cut start
[18:08:30]*** Partial cut
[18:08:30]*** CUTSNS_PIN = 1
[18:08:30]*** CUTSNS_PIN = 0
[18:08:30]*** Brake cut motor
[18:08:30]*** Stop cut motor
[18:08:30]*** Cut end
[18:08:31]No OFD sender enable setting
[18:08:31]*** Cut start
[18:08:31]*** Partial cut
[18:08:31]*** CUTSNS_PIN = 1
[18:08:31]*** CUTSNS_PIN = 0
[18:08:31]*** Brake cut motor
[18:08:31]*** Stop cut motor
[18:08:31]*** Cut end
[18:08:32]*** Cut start
[18:08:32]*** Partial cut
[18:08:32]*** CUTSNS_PIN = 1
[18:08:32]*** CUTSNS_PIN = 0
[18:08:32]*** Brake cut motor
[18:08:32]*** Stop cut motor
[18:08:32]*** Cut end
[18:08:33]*** Cut start
[18:08:33]*** Partial cut
[18:08:33]*** CUTSNS_PIN = 1
[18:08:33]*** CUTSNS_PIN = 0
[18:08:33]*** Brake cut motor
[00:00:11]

*** EcrCore started. Build 196 ***
[00:00:11]/dev/ttyS4 opened
[00:00:11]MH_InterfaceInit /dev/i2c-1
[00:00:11]Malloc ok
[00:00:11]MH_GetMetrics
[00:00:11]Write to MH i2c: 00 00 00 01 00 00 
[00:00:11]Write i2c OK
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: 00 
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: 00 29 00 
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: 00 29 00 01 00 00 03 9C 77 C0 01 31 39 30 33 53 51 38 38 54 00 00 00 00 57 25 8B FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 01 03 00 30 
[00:00:11]Are we in boot?
[00:00:11]We are in boot - try to switch
[00:00:11]Write to MH i2c: A0 00 00 02 00 A1 
[00:00:11]Write i2c OK
[00:00:11]MH_I2C_Read...
[00:00:11]*** Check firmware version 30620, crc_r 49A1A6DB, crc_c: 49A1A6DB, size: 53248
[00:00:11]*** 
[00:00:11]Read from MH i2c: A0 
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: A0 01 00 
[00:00:11]MH_I2C_Read...
[00:00:11]Read from MH i2c: A0 01 00 02 00 00 A2 
[00:00:11]*** Starting fw at address 01020100 (2007E328 010249C5)
[00:00:11]*** Waiting for read because exit forced
[00:00:11]*** 10 ms more...
[00:00:11]*** MH1903S init start (LINUX_LIGHT)
[00:00:11]*** Compilation Date Jun 20 2023 Time 12:36:20
[00:00:11]*** Serial: 3139303353513838 540000000057258B (1903SQ88T)
[00:00:11]*** User serial: FFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFF (ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ)
[00:00:11]*** step 0: 5000 (2650, 2350 REF)
[00:00:11]*** step 1: 4835 (2500, 2335 REF)
[00:00:11]*** step 2: 4676 (2440, 2236 REF)
[00:00:11]*** step 3: 4523 (2280, 2243 REF)
[00:00:11]*** step 4: 4376 (2160, 2216 REF)
[00:00:11]*** step 5: 4235 (2050, 2185 REF)
[00:00:11]*** step 6: 4098 (1950, 2148 REF)
[00:00:11]*** step 7: 3967 (1870, 2097 REF)
[00:00:11]*** step 8: 3840 (1828, 2012 REF)
[00:00:11]*** step 9: 3719 (1728, 1991 REF)
[00:00:11]*** step 10: 3601 (1675, 1926 REF)
[00:00:11]*** step 11: 3488 (1635, 1853 REF)
[00:00:11]*** step 12: 3379 (1595, 1784 REF)
[00:00:11]*** step 13: 3275 (1565, 1710 REF)
[00:00:11]*** step 14: 3174 (1543, 1631 REF)
[00:00:11]*** step 15: 3077 (1523, 1554 REF)
[00:00:11]*** step 16: 2983 (1503, 1480 REF)
[00:00:11]*** step 17: 2893 (1486, 1407 REF)
[00:00:11]*** step 18: 2806 (1466, 1340 REF)
[00:00:11]*** step 19: 2723 (1426, 1297 REF)
[00:00:11]*** step 20: 2642 (1406, 1236 REF)
[00:00:11]*** step 21: 2565 (1384, 1181 REF)
[00:00:11]*** step 22: 2490 (1364, 1126 REF)
[00:00:11]*** step 23: 2418 (1344, 1074 REF)
[00:00:11]*** step 24: 2349 (1322, 1027 REF)
[00:00:11]*** step 25: 2283 (1302, 981 REF)
[00:00:11]*** step 26: 2218 (1282, 936 REF)
[00:00:11]*** step 27: 2157 (1262, 895 REF)
[00:00:11]*** step 28: 2097 (1242, 855 REF)
[00:00:11]*** step 29: 2040 (1222, 818 REF)
[00:00:11]*** step 30: 1985 (1202, 783 REF)
[00:00:11]*** step 31: 1932 (1191, 741 REF)
[00:00:11]*** step 32: 1880 (1181, 699 REF)
[00:00:11]*** step 33: 1831 (1171, 660 REF)
[00:00:11]*** step 34: 1784 (1161, 623 REF)
[00:00:11]*** step 35: 1738 (1151, 587 REF)
[00:00:11]*** step 36: 1694 (1141, 553 REF)
[00:00:11]*** step 37: 1652 (1131, 521 REF)
[00:00:11]*** step 38: 1611 (1121, 490 REF)
[00:00:11]*** step 39: 1572 (1111, 461 REF)
[00:00:11]*** step 40: 1534 (1103, 431 REF)
[00:00:11]*** step 41: 1497 (1093, 404 REF)
[00:00:11]*** step 42: 1462 (1083, 379 REF)
[00:00:11]*** step 43: 1428 (1073, 355 REF)
[00:00:11]*** step 44: 1396 (1063, 333 REF)
[00:00:11]*** step 45: 1365 (1053, 312 REF)
[00:00:11]*** step 46: 1334 (1043, 291 REF)
[00:00:11]*** step 47: 1305 (1033, 272 REF)
[00:00:11]*** step 48: 1277 (1023, 254 REF)
[00:00:11]*** step 49: 1250 (1013, 237 REF)
[00:00:11]*** step 50: 1224 (990, 234 REF)
[00:00:11]*** step 51: 1199 (980, 219 REF)
[00:00:11]*** step 52: 1175 (970, 205 REF)
[00:00:11]*** step 53: 1152 (960, 192 REF)
[00:00:11]*** step 54: 1130 (950, 180 REF)
[00:00:11]*** step 55: 1108 (940, 168 REF)
[00:00:11]*** step 56: 1088 (930, 158 REF)
[00:00:11]*** step 57: 1068 (920, 148 REF)
[00:00:11]*** step 58: 1049 (910, 139 REF)
[00:00:11]*** step 59: 1030 (900, 130 REF)
[00:00:11]*** step 60: 1012 (890, 122 REF)
[00:00:11]*** step 61: 995 (880, 115 REF)
[00:00:11]*** step 62: 979 (870, 109 REF)
[00:00:11]*** step 63: 963 (860, 103 REF)
[00:00:11]*** step 64: 948 (850, 98 REF)
[00:00:11]*** step 65: 933 (840, 93 REF)
[00:00:11]*** step 66: 919 (830, 89 REF)
[00:00:11]*** step 67: 905 (820, 85 REF)
[00:00:11]*** step 68: 892 (810, 82 REF)
[00:00:11]*** step 69: 879 (800, 79 REF)
[00:00:11]*** step 70: 867 (790, 77 REF)
[00:00:11]*** step 71: 855 (780, 75 REF)
[00:00:11]*** step 72: 844 (770, 74 REF)
[00:00:11]*** step 73: 833 (760, 73 REF)
[00:00:11]*** step 74: 822 (750, 72 REF)
[00:00:11]*** step 75: 812 (740, 72 REF)
[00:00:11]*** step 76: 803 (730, 73 REF)
[00:00:11]*** step 77: 793 (720, 73 REF)
[00:00:11]*** step 78: 784 (710, 74 REF)
[00:00:11]*** step 79: 776 (700, 76 REF)
[00:00:11]*** step 80: 767 (690, 77 REF)
[00:00:11]*** step 81: 759 (680, 79 REF)
[00:00:11]*** step 82: 751 (670, 81 REF)
[00:00:11]*** step 83: 744 (660, 84 REF)
[00:00:11]*** step 84: 737 (650, 87 REF)
[00:00:11]*** step 85: 730 (640, 90 REF)
[00:00:11]*** step 86: 723 (630, 93 REF)
[00:00:11]*** step 87: 717 (620, 97 REF)
[00:00:11]*** step 88: 710 (610, 100 REF)
[00:00:11]*** step 89: 705 (600, 105 REF)
[00:00:11]*** step 90: 699
[00:00:11]*** step 91: 693
[00:00:11]*** step 92: 688
[00:00:11]*** step 93: 683
[00:00:11]*** step 94: 678
[00:00:11]*** step 95: 673
[00:00:11]*** step 96: 669
[00:00:11]*** step 97: 664
[00:00:11]*** step 98: 660
[00:00:11]*** step 99: 656
[00:00:11]*** step 100: 652
[00:00:11]*** step 101: 648
[00:00:11]*** step 102: 644
[00:00:11]*** step 103: 641
[00:00:11]*** step 104: 638
[00:00:11]*** step 105: 634
[00:00:11]*** step 106: 631
[00:00:11]*** step 107: 628
[00:00:11]*** step 108: 625
[00:00:11]*** step 109: 622
[00:00:11]*** step 110: 620
[00:00:11]*** step 111: 617
[00:00:11]*** step 112: 615
[00:00:11]*** step 113: 612
[00:00:11]*** step 114: 610
[00:00:11]*** step 115: 608
[00:00:11]*** step 116: 605
[00:00:11]*** step 117: 603
[00:00:11]*** step 118: 601
[00:00:11]*** step 119: 599
[00:00:11]*** printer: Printer HW initialized
[00:00:11]*** initSamCard finished
[00:00:11]*** RTC: 11728654+1717373615=1729102269
[00:00:11]*** BPK Status Register BPK_RDY = 0x0
[00:00:11]*** SEN State Register SEN_STATE = 0x200ff
[00:00:11]*** 32K Frequency Sensor Enable SEN_XTAL32_EN = 0x80000055
[00:00:11]*** Analog Control Register 0 SEN_ANA0 = 0x33540624
[00:00:11]*** Is cutter blocked?
[00:00:11]*** FLAG_PRN_PAP2 set
[00:00:12]MH_GetMetrics
[00:00:12]Write to MH i2c: 00 00 00 03 00 02 
[00:00:12]Write i2c OK
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 00 29 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 00 29 00 03 00 00 03 9C 77 C0 01 31 39 30 33 53 51 38 38 54 00 00 00 00 57 25 8B FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 00 03 00 31 
[00:00:12]Are we in boot?
[00:00:12]We are not in boot now
[00:00:12]Write to MH i2c: 01 00 00 04 00 04 
[00:00:12]Write i2c OK
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 01 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 01 07 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: 01 07 00 04 00 00 02 00 00 00 FF 0F 1B 
[00:00:12]Model is 3
[00:00:12]MH firmware is 30620
[00:00:12]MH boot firmware is 3
[00:00:12]MH_SetPrinterDots 448
[00:00:12]HeadWidthInBytes 56
[00:00:12]maxmasksize 7
[00:00:12]Write to MH i2c: D6 06 00 05 00 41 00 60 00 FF FF 7F 
[00:00:12]Write i2c OK
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D6 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D6 01 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D6 01 00 05 00 00 DB 
[00:00:12]Write to MH i2c: D5 00 00 06 00 DA 
[00:00:12]Write i2c OK
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D5 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D5 01 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: D5 01 00 06 00 00 DB 
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]LoadDictionaryFromArray
[00:00:12]Load OK
[00:00:12]ExternCall_SetCallbacks
[00:00:12]NVStorageInit
[00:00:12]MH_GetDate
[00:00:12]Write to MH i2c: F0 00 00 07 00 F6 
[00:00:12]Write i2c OK
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: F0 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: F0 09 00 
[00:00:12]MH_I2C_Read...
[00:00:12]Read from MH i2c: F0 09 00 07 00 00 BE 01 10 67 AF 0A 5D 66 B1 
[18:11:10]Current date/time: 16.10.2024 18:11
[18:11:10]FM_Init
[18:11:10]wFMConnect
[18:11:10]MH_SAM_On
[18:11:10]Write to MH i2c: E0 00 00 08 00 E7 
[18:11:10]Write i2c OK
[18:11:10]MH_I2C_Read...
[18:11:10]*** iso7816_init failed -2820!
[18:11:10]Read from MH i2c: E0 
[18:11:10]MH_I2C_Read...
[18:11:10]Read from MH i2c: E0 05 00 
[18:11:10]MH_I2C_Read...
[18:11:10]Read from MH i2c: E0 05 00 08 00 10 FC F4 FF FF EA 
[18:11:10]Error from MH - 10
[18:11:10]No FM detected - please insert FM
[18:11:10]DocumentArchiveInit
[18:11:10]Start Httpd...
[18:11:10]Httpd thread 3067530596 created
[18:11:10]Write to MH i2c: 01 00 00 09 00 09 
[18:11:10]Write i2c OK
[18:11:10]MH_I2C_Read...
[18:11:10]Read from MH i2c: 01 
[18:11:10]MH_I2C_Read...
[18:11:10]Read from MH i2c: 01 07 00 
[18:11:10]MH_I2C_Read...
[18:11:10]Read from MH i2c: 01 07 00 09 00 00 02 00 00 00 FF 0F 20 
[18:11:10]No OFD sender enable setting
[18:11:10]MH Int Process started
[18:11:10]Allocated Socket 7
[18:11:10]Bind OK
[18:11:10]Listen OK
[18:11:10]httpd running on port 8080
[18:11:10]Waiting for new connection...
[18:11:15]No OFD sender enable setting
[18:11:20]No OFD sender enable setting
[18:11:25]No OFD sender enable setting
[18:11:30]No OFD sender enable setting
[18:11:32]*** Cut start
[18:11:32]*** Partial cut
[18:11:32]*** CUTSNS_PIN = 1
[18:11:32]*** CUTSNS_PIN = 0
[18:11:33]*** Brake cut motor
[18:11:33]*** Stop cut motor
[18:11:33]*** Cut end
[18:11:33]*** Cut start
[18:11:33]*** Partial cut
[18:11:33]*** CUTSNS_PIN = 1
[18:11:33]*** CUTSNS_PIN = 0
[18:11:33]*** Brake cut motor
[18:11:34]*** Stop cut motor
[18:11:34]*** Cut end
[18:11:34]*** Cut start
[18:11:34]*** Partial cut
[18:11:34]*** CUTSNS_PIN = 1
[18:11:34]*** CUTSNS_PIN = 0
[18:11:34]*** Brake cut motor
[18:11:34]*** Stop cut motor
[18:11:34]*** Cut end
[18:11:35]No OFD sender enable setting
[18:11:35]*** Cut start
[18:11:35]*** Partial cut
[18:11:35]*** CUTSNS_PIN = 1
[18:11:35]*** CUTSNS_PIN = 0
[18:11:35]*** Brake cut motor
[18:11:35]*** Stop cut motor
[18:11:35]*** Cut end
[18:11:36]*** Cut start
[18:11:36]*** Partial cut
[18:11:36]*** CUTSNS_PIN = 1
[18:11:36]*** CUTSNS_PIN = 0
[18:11:36]*** Brake cut motor
[18:11:36]*** Stop cut motor
[18:11:36]*** Cut end
[18:11:37]*** Cut start
[18:11:37]*** Partial cut
[18:11:37]*** CUTSNS_PIN = 1
[18:11:37]*** CUTSNS_PIN = 0
[18:11:37]*** Brake cut motor
[18:11:37]*** Stop cut motor
[18:11:37]*** Cut end
[18:11:38]*** Cut start
[18:11:38]*** Partial cut
[18:11:38]*** CUTSNS_PIN = 1
[18:11:38]*** CUTSNS_PIN = 0
[18:11:38]*** Brake cut motor
[18:11:38]*** Stop cut motor
[18:11:38]*** Cut end
[18:11:39]*** Cut start
[18:11:39]*** Partial cut
[18:11:39]*** CUTSNS_PIN = 1
[18:11:39]*** CUTSNS_PIN = 0
[18:11:39]*** Brake cut motor
[18:11:39]*** Stop cut motor
[18:11:39]*** Cut end
[18:11:40]*** Cut start
[18:11:40]*** Partial cut
[18:11:40]*** CUTSNS_PIN = 1
[18:11:40]*** CUTSNS_PIN = 0
[18:11:40]No OFD sender enable setting
[18:11:40]*** Brake cut motor
[18:11:40]*** Stop cut motor
[18:11:40]*** Cut end
[18:11:41]*** Cut start
[18:11:41]*** Partial cut
[18:11:41]*** CUTSNS_PIN = 1
[18:11:41]*** CUTSNS_PIN = 0
[18:11:41]*** Brake cut motor
[18:11:41]*** Stop cut motor
[18:11:41]*** Cut end
[18:11:42]*** Cut start
[18:11:42]*** Partial cut
[18:11:42]*** CUTSNS_PIN = 1
[18:11:42]*** CUTSNS_PIN = 0
[18:11:42]*** Brake cut motor
[18:11:42]*** Stop cut motor
[18:11:42]*** Cut end
[18:11:43]*** Cut start
[18:11:43]*** Partial cut
[18:11:43]*** CUTSNS_PIN = 1
[18:11:43]*** CUTSNS_PIN = 0
[18:11:43]*** Brake cut motor
[18:11:43]*** Stop cut motor
[18:11:43]*** Cut end
[18:11:44]*** Cut start
[18:11:44]*** Partial cut
[18:11:44]*** CUTSNS_PIN = 1
[18:11:44]*** CUTSNS_PIN = 0
[18:11:44]*** Brake cut motor
[18:11:44]*** Stop cut motor
[18:11:44]*** Cut end
[18:11:45]No OFD sender enable setting
[18:11:45]*** Cut start
[18:11:45]*** Partial cut
[18:11:45]*** CUTSNS_PIN = 1
[18:11:45]*** CUTSNS_PIN = 0
[18:11:45]*** Brake cut motor
[18:11:45]*** Stop cut motor
[18:11:45]*** Cut end
[18:11:46]*** Cut start
[18:11:46]*** Partial cut
[18:11:46]*** CUTSNS_PIN = 1
[18:11:46]*** CUTSNS_PIN = 0
[18:11:46]*** Brake cut motor
[18:11:46]*** Stop cut motor
[18:11:46]*** Cut end
[18:11:47]*** Cut start
[18:11:47]*** Partial cut
[18:11:47]*** CUTSNS_PIN = 1
[18:11:47]*** CUTSNS_PIN = 0
[18:11:47]*** Brake cut motor
[18:11:47]*** Stop cut motor
[18:11:47]*** Cut end
[18:11:48]*** Cut start
[18:11:48]*** Partial cut
[18:11:48]*** CUTSNS_PIN = 1
[18:11:48]*** CUTSNS_PIN = 0
[18:11:48]*** Brake cut motor
[18:11:48]*** Stop cut motor
[18:11:48]*** Cut end
[18:11:49]*** Cut start
[18:11:49]*** Partial cut
[18:11:49]*** CUTSNS_PIN = 1
[18:11:49]*** CUTSNS_PIN = 0
[18:11:49]*** Brake cut motor
[18:11:49]*** Stop cut motor
[18:11:49]*** Cut end
[18:11:50]*** Cut start
[18:11:50]*** Partial cut
[18:11:50]*** CUTSNS_PIN = 1
[18:11:50]*** CUTSNS_PIN = 0
[18:11:50]No OFD sender enable setting
[18:11:50]*** Brake cut motor
[18:11:50]*** Stop cut motor
[18:11:50]*** Cut end
[18:11:51]*** Cut start
[18:11:51]*** Partial cut
[18:11:51]*** CUTSNS_PIN = 1
[18:11:51]*** CUTSNS_PIN = 0
[18:11:51]*** Brake cut motor
[18:11:51]*** Stop cut motor
[18:11:51]*** Cut end
[18:11:52]*** Cut start
[18:11:52]*** Partial cut
[18:11:52]*** CUTSNS_PIN = 1
[18:11:52]*** CUTSNS_PIN = 0
[18:11:52]*** Brake cut motor
[18:11:52]*** Stop cut motor
[18:11:52]*** Cut end
[18:11:53]*** Cut start
[18:11:53]*** Partial cut
[18:11:53]*** CUTSNS_PIN = 1
[18:11:53]*** CUTSNS_PIN = 0
[18:11:53]*** Brake cut motor
[18:11:53]*** Stop cut motor
[18:11:53]*** Cut end
[18:11:54]*** Cut start
[18:11:54]*** Partial cut
[18:11:54]*** CUTSNS_PIN = 1
[18:11:54]*** CUTSNS_PIN = 0
[18:11:54]*** Brake cut motor
[18:11:54]*** Stop cut motor
[18:11:54]*** Cut end
[18:11:55]No OFD sender enable setting
[18:11:55]*** Cut start
[18:11:55]*** Partial cut
[18:11:55]*** CUTSNS_PIN = 1
[18:11:55]*** CUTSNS_PIN = 0
[18:11:55]*** Brake cut motor
[18:11:55]*** Stop cut motor
[18:11:55]*** Cut end
[18:11:56]*** Cut start
[18:11:56]*** Partial cut
[18:11:56]*** CUTSNS_PIN = 1
[18:11:56]*** CUTSNS_PIN = 0
[18:11:56]*** Brake cut motor
[18:11:56]*** Stop cut motor
[18:11:56]*** Cut end
[18:11:58]*** Cut start
[18:11:58]*** Partial cut
[18:11:58]*** CUTSNS_PIN = 1
[18:11:58]*** CUTSNS_PIN = 0
[18:11:58]*** Brake cut motor
[18:11:58]*** Stop cut motor
[18:11:58]*** Cut end
[18:12:00]No OFD sender enable setting
[18:12:05]No OFD sender enable setting
[18:12:10]No OFD sender enable setting
[18:12:15]No OFD sender enable setting